Toshiba TDP-S8 owner manual Connection, Before connection

Connection

Before connection

•Read the owner’s manual of the device you are connecting to the projector.

•Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.42 , etc.

•Turn off the power of both devices before connecting.

•The figures are sample connections.

•The MONITOR terminal outputs analog RGB signals or component video signals (Y/PB/ PR) from the COMPUTER IN terminals as selected with the INPUT button. If no input is selected, the MONITOR terminal outputs the input signals last selected among the COMPUTER terminals.

•A computer monitor usually cannot accept Y/PB/PR signals correctly.

Monitor

To video output

AV cable (not supplied)

Computer (for control)

To audio	p.44
input
Audio cable	To RS-232C
(not supplied)	terminal
	Control cable

			AUDIO IN
MONITOR	COMPUTER	S-VIDEO VIDEO	CONTROL

AUDIO OUT

	RGB cable	AV cable
	(supplied)	(not supplied)	Audio cable
Computer
	To RGB output	To S-video	(not supplied)
		output

To audio output

Notes

•Moving pictures played back on computers using DVD software may appear unnatural if it is projected with this projector, but it is not a malfunction.

•When an AUDIO OUT terminal is connected, sound is not output from the projector speaker.

•Output volume of AUDIO OUT terminal can be adjusted by the VOL button.

22