Toshiba TDP-S8 Trouble indications, No power, Lamp went out during use, or won’t come on

Page 39

Trouble indications

The indicator lights inform you of interminal abnormalities.

	POWER	No power
	POWER	⇒ Problem with projector
		⇒ Problem with projector
		• Unplug the power cord, and contact your dealer.

			Lamp went out during use, or won’t come on
POWER			⇒ Lamp temperature is high so that it is difﬁcult to turn on, the lifetime of
POWER			the lamp has ended or the projector is malfunctioning.
			the lamp has ended or the projector is malfunctioning.
(Red lit)			•	Unplug the power cord and wait for a short while, then turn the power
		(Red lit)		back on.


			•	If a lamp burns out, replace it with a new one.
			•	If a lamp burns out, replace it with a new one.
			❈ After approx. 5 second of abnormal display, the projector returns to
				the standby state waiting for internal cool down.

Power went out during use

⇒Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not

POWER	blocked.
•	Unplug the power cord and wait for a short while, then turn the power
	back on.

❈The icon will appear before the power goes out.

❈After approx. 5 second of abnormal display, the projector returns to the standby state waiting for internal cool down.

		Power went out during use
	POWER	⇒ Problem with internal cooling fan.
		• Unplug the power cord, and contact your dealer.
	FLASH	❈ The	icon will appear before the power goes out.
		❈ After approx. 5 second of abnormal display, the projector returns to

		the standby state waiting for internal cool down.

Power went out during use

⇒Problem inside the projector.

	POWER		•	Unplug the power cord and wait for a short while, then turn the power
			•
				back on.
FLASH		FLASH	•	If the above action will not clear the problem, unplug the power cord,
FLASH		FLASH		and contact your dealer.
				and contact your dealer.

❈The icon will appear before the power goes out.

❈After approx. 5 second of abnormal display, the projector returns to the standby state waiting for internal cool down.

Others

39

Image 39

Contents Data Projector TDP-S8 USA only Safety PrecautionsBefore Using Important Safety Instructions Power Sources VentilationSource of Light Water and Moisture Power-Cord ProtectionCleaning HeatStack Inhibited Lightning stormsDo not place the product vertically Object and Liquid EntryAccessories Damage Requiring ServiceServicing Do not use the product in a closed installation state Important Safety InstructionsReplacement Parts Safety CheckSave Original Packing Materials Power Supply Cord SelectionImportant Precautions Place and Manner of InstallationImportant Precautions Exemption ClausesAvoid Volatile Liquid Trademarks Other Cautions and InformationsCopyrights DisposalRemote Control Batteries Contents Page Checking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Parts on the rear panel Preparing and using the remote control Loading dry-cell batteries Into the remote controlOperating the remote control Placement Placement StylesFloor-mounted front projection Projection Distance and Size As seen from the sideBefore connection ConnectionTurning the power on Press the ON/STANDBY button Turning the power on and offPress the ON/STANDBY button again Turning the power off Press the ON/STANDBY buttonActivate the connected device Turn on the powerSelect the language When using the ﬁrst time Basic operationsTo stow the foot adjuster, hold up the projector Projector placement angle adjustmentsAdjusting the screen size and focus  To adjust the horizontal angle, use Tilt adjusterCorrecting the keystone distortion Using handy featuresUsing auto setting Only for analog input from computer Press the remote control’s Auto SET buttonKey Lock Password functionCutting off the picture and sound temporarily Mute Freezing the image FreezeUsing handy features If you forgot the password, please inquire your dealerRe-enter the same password for conﬁrmation How to use the menus Using the menusImage adjustment menu Display setting menu Detailed description Screen sizeBackground Lamp power Using the menusDefault setting menu Detailed description Fan modeB/P R Displaying Information Status displayLamp replacement When the lamp is brokenAbout lamp Lamp replacement Used Lamps Reset the lamp timerLens and main unit cleaning Lens cleaningMain unit cleaning Lamp went out during use, or won’t come on No powerPower went out during use Trouble indicationsBefore calling service personnel Speciﬁcation SpeciﬁcationsList of general speciﬁcations Separately sold productSpeciﬁcations List of supported signals RGB signalsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsPin assignment of Computer in & Monitor terminals Pin assignment Control terminal