Using the menus (Continued)
■The default setting menu
This menu shows placement status and other settings.
Item |
|
| Description |
|
|
Projection | Sets projection mode in accordance with Placement Style.p.20 |
| |||
mode | (Standard) | (Rear) | (Ceiling) | (Rear ceiling) |
|
|
| ||||
|
|
| |||
Auto input | Set whether the input with signals is only selected or not. |
| |||
search |
|
|
| On | Off |
Language | Select one of the languages below to use for displaying the menu | ||||
| and messages |
|
|
|
|
[
: Enter setting mode] 
[ 
:Selection] 
[Apply: 
]
English/Français/Deutsch/Italiano/Español/Português/
/Svenska/Türkçe/Polski/ 
/ 
/ 
/
Fan mode | Sets the cooling fan speed. | Standard | High |
|
| ||
Lamp power | Sets the lamp power. | Low | Standard |
|
| ||
Password | Password function p.28 | On | Off |
| When [Password] is [On], the Password Setting screen is displayed. | ||
Power on Sets whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the power cord is plugged in (Auto).
Manual 
Auto
Detailed description [Fan mode]
Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use the projector, for example, at high altitude (over 1,500 meters above sea level).
[Lamp power]
Operations
When [Lamp power] is set to [Low], the screen becomes a little darker, but the cooling fan noise gets quieter.
33