Basic operations
1Turn on the power.
Turn on the power by following the instructions in “Turning the power on” p.23 .
2Select the language (When using the first time).
When the projector is used for the first time after purchase,the start menu for language(to display the menus and messages on screen) and confugration is dis- played in English.(if the screen is out of focus,adjust it according to the step 6 .)
Use the 
or 
button to select the desired language and press the 
button.
Message for setup confirmation is displayed in a selected language.
English
German
French
Italian
Spanish
Portuguese
Chinese (traditional)
Chinese (simplified)
Japanese
Korean
Russian
Swedish
Turkish
Polish
Notes
•When the projector is turned on the next time, the start menu does not appear upon startup. However, if [Reset all] is executed from the Default setting menu p.33 , the start menu will be displayed the next time when the power is turned on.
•The language can slso be set via the Display setting menu p.32 .
•This owner’s manual assumes that English has been selected.
3Activate the connected device.
Turn on and start the connected device such as a computer.
4Press the INPUT button.
An image of the connected eqipment is projected.
Each time you press the INPUT button, it switches to the input of the connected equip- ment that is outputting video signals.
Operations
Notes
•When [Auto input search] is set to [On] in the Default setting menu p.33 (factory setting is [On]), the input is switched to the connected equipment that is outputting video signals each time you press the INPUT button p.41 .
25