Toshiba TDP-S8 owner manual Using handy features, Correcting the keystone distortion

Page 27

Using handy features

■Using auto setting (Only for analog input from computer)

This function sets up the projector to the optimum state such as	Remote
sampling phase, frequency, screen position, and clamp for each	Control
type of the input signal by using simple operations.

Press the remote control’s AUTO SET button.

For computer input, the icon will appear during processing.

Notes

•The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.41 , p.42 .

■Correcting the keystone distortion

When the projector placement angle against the screen is changed while projecting the image, the picture will undergo keystone (trapezoidal) distortion.

This projector is capable of correcting this key- stone distortion.

Control panel

POWER

KEYSTONE +

Before correction After correction

KEYSTONE -

Operations

Press the KEYSTONE or button.

Image 27

Contents Data Projector TDP-S8 USA only Safety PrecautionsBefore Using Important Safety Instructions Power Sources VentilationSource of Light Water and Moisture Power-Cord ProtectionCleaning HeatStack Inhibited Lightning stormsDo not place the product vertically Object and Liquid EntryAccessories Damage Requiring ServiceServicing Do not use the product in a closed installation state Important Safety InstructionsReplacement Parts Safety CheckSave Original Packing Materials Power Supply Cord SelectionImportant Precautions Place and Manner of InstallationImportant Precautions Exemption ClausesAvoid Volatile Liquid Trademarks Other Cautions and InformationsCopyrights DisposalRemote Control Batteries Contents Page Checking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Parts on the rear panel Preparing and using the remote control Loading dry-cell batteries Into the remote controlOperating the remote control Placement Placement StylesFloor-mounted front projection Projection Distance and Size As seen from the sideBefore connection ConnectionTurning the power on Press the ON/STANDBY button Turning the power on and offPress the ON/STANDBY button again Turning the power off Press the ON/STANDBY buttonActivate the connected device Turn on the powerSelect the language When using the ﬁrst time Basic operationsTo stow the foot adjuster, hold up the projector Projector placement angle adjustmentsAdjusting the screen size and focus  To adjust the horizontal angle, use Tilt adjusterCorrecting the keystone distortion Using handy featuresUsing auto setting Only for analog input from computer Press the remote control’s Auto SET buttonKey Lock Password functionCutting off the picture and sound temporarily Mute Freezing the image FreezeUsing handy features If you forgot the password, please inquire your dealerRe-enter the same password for conﬁrmation How to use the menus Using the menusImage adjustment menu Display setting menu Detailed description Screen sizeBackground Lamp power Using the menusDefault setting menu Detailed description Fan modeB/P R Displaying Information Status displayLamp replacement When the lamp is brokenAbout lamp Lamp replacement Used Lamps Reset the lamp timerLens and main unit cleaning Lens cleaningMain unit cleaning Lamp went out during use, or won’t come on No powerPower went out during use Trouble indicationsBefore calling service personnel Speciﬁcation SpeciﬁcationsList of general speciﬁcations Separately sold productSpeciﬁcations List of supported signals RGB signalsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsPin assignment of Computer in & Monitor terminals Pin assignment Control terminal