Toshiba TDP-T9 Cutting off the picture and sound temporarily Mute, Freezing the image Freeze

Page 30

■Cutting off the picture and sound temporarily (Mute)

When you want to project the images of another projector, overhead projector, etc. temporarily, this projector’s images and sound can be turned off.

Press the remote control’s MUTE button.

The picture and sound are cut off. (The Mute function is released when pressing the MUTE button again.)

Notes

•The icon will appear while mute is in effect.

•Operating any other functions will also cancel the muting.

Remote Control

FREEZE

1 2 3

4 5 6

■ Freezing the image (Freeze)	Remote
The image being projected can be frozen. This function is to be used	Control
to pause a video during a presentation, etc.

Press the remote control’s FREEZE button.

The picture pauses. (The Freeze function is released when pressing the FREEZE button again.)

Notes

•The icon will appear while freeze is in effect.

•Other operation will also release the freeze.

•Even if an image is frozen on the projector, the pictures are running on the video or other equipment.

•If you use this function on commercial video software, broadcast or cable-broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws.

1 2 3

4 5 6

■Key Lock

1To enter key lock

Push and hold MENU button 5sec.

2To exit from key lock

Push and hold MENU button 5sec.

If push any key durig key locking, display key lock icon.

•Protect from operating errors by locking on the control panel buttons of the projector (The remote control operation are available)

■Password function

How to set password (from [Off] to [On])

1Select [Password] in the Default setting menu and press the button.

The password setting screen is displayed

30

Image 30

Contents Data Projector TDP-T9 Safety Precautions USA onlyBefore Using Important Safety Instructions Power Sources VentilationSource of Light Heat Power-Cord ProtectionCleaning Water and MoistureObject and Liquid Entry Lightning stormsDo not place the product vertically Stack InhibitedAccessories Damage Requiring ServiceServicing Safety Check Important Safety InstructionsReplacement Parts Do not use the product in a closed installation statePlace and Manner of Installation Power Supply Cord SelectionImportant Precautions Save Original Packing MaterialsImportant Precautions Exemption ClausesAvoid Volatile Liquid Disposal Other Cautions and InformationsCopyrights TrademarksRemote Control Batteries Contents Page Checking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Label locations Parts on the rear panel Operating the remote control Preparing and using the remote controlLoading dry-cell batteries Into the remote control  Remove the battery cover  Insert the dry-cell batteriesConnecting a computer Operating a computerPlacement Placement StylesFloor-mounted front projection Projection Distance and Size Screen As seen from above As seen from the sideConnection Before connectionTurning the power on and off Turning the power on Press the ON/STANDBY buttonTurning the power off Press the ON/STANDBY button Press the ON/STANDBY button againBasic operations Turn on the powerSelect the language When using the ﬁrst time Activate the connected device To adjust the horizontal angle, use Tilt adjuster Projector placement angle adjustmentsAdjusting the screen size and focus To stow the foot adjuster, hold up the projectorPress the remote control’s Auto SET button Using handy featuresUsing auto setting Only for analog input from computer Correcting the keystone distortionFreezing the image Freeze Password functionCutting off the picture and sound temporarily Mute Key LockUsing handy features If you forgot the password, please inquire your dealerRe-enter the same password for conﬁrmation Using the menus How to use the menusImage adjustment menu Display setting menu Detailed description Screen sizeBackground Detailed description Fan mode Using the menusDefault setting menu Lamp powerDisplaying Information Status display B/P RLamp replacement When the lamp is brokenAbout lamp Lamp replacement Reset the lamp timer Used LampsLens and main unit cleaning Lens cleaningMain unit cleaning Trouble indications No powerPower went out during use Lamp went out during use, or won’t come onBefore calling service personnel Separately sold product SpeciﬁcationsList of general speciﬁcations SpeciﬁcationList of supported signals RGB signals SpeciﬁcationsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsPin assignment of Computer in & Monitor terminals Control terminal Pin assignmentOthers