Toshiba TDP-T9 owner manual Reset the lamp timer, Used Lamps

Page 39

7Reset the lamp timer.

See the lamp’s manual for instructions on resetting the lamp timer.

Notes and Precautions

•It is recommended that the lamp be replaced after 2,000 hours of use.When [Lamp time] reaches 2,000 hours,the icon and a message will appear. (After 2,000 hours, they will appear when the power is on at the ﬁrst time every 100 hours.) This display disappears when you press the button.

•Attach the outer lamp cover correctly so that it is not loose. If it is not attached correctly, the projector may fail to be powered on or the lamp may fail to come on.

•Always replace the lamp with a new one.

•The lamp is made out of glass. Do not touch the glass surface with your bare hands, bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic mer- cury. Be careful not to break used lamps, and dispose of them in accordance with local regulations.

Maintenance

39

Image 39

Contents Data Projector TDP-T9 USA only Safety PrecautionsBefore Using Important Safety Instructions Power Sources VentilationSource of Light Water and Moisture Power-Cord ProtectionCleaning HeatStack Inhibited Lightning stormsDo not place the product vertically Object and Liquid EntryAccessories Damage Requiring ServiceServicing Do not use the product in a closed installation state Important Safety InstructionsReplacement Parts Safety CheckSave Original Packing Materials Power Supply Cord SelectionImportant Precautions Place and Manner of InstallationImportant Precautions Exemption ClausesAvoid Volatile Liquid Trademarks Other Cautions and InformationsCopyrights DisposalRemote Control Batteries Contents Page Checking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Label locations Parts on the rear panel  Remove the battery cover  Insert the dry-cell batteries Preparing and using the remote controlLoading dry-cell batteries Into the remote control Operating the remote controlOperating a computer Connecting a computerPlacement Placement StylesFloor-mounted front projection Screen As seen from above As seen from the side Projection Distance and SizeBefore connection ConnectionTurning the power on Press the ON/STANDBY button Turning the power on and offPress the ON/STANDBY button again Turning the power off Press the ON/STANDBY buttonActivate the connected device Turn on the powerSelect the language When using the ﬁrst time Basic operationsTo stow the foot adjuster, hold up the projector Projector placement angle adjustmentsAdjusting the screen size and focus  To adjust the horizontal angle, use Tilt adjusterCorrecting the keystone distortion Using handy featuresUsing auto setting Only for analog input from computer Press the remote control’s Auto SET buttonKey Lock Password functionCutting off the picture and sound temporarily Mute Freezing the image FreezeUsing handy features If you forgot the password, please inquire your dealerRe-enter the same password for conﬁrmation How to use the menus Using the menusImage adjustment menu Display setting menu Detailed description Screen sizeBackground Lamp power Using the menusDefault setting menu Detailed description Fan modeB/P R Displaying Information Status displayLamp replacement When the lamp is brokenAbout lamp Lamp replacement Used Lamps Reset the lamp timerLens and main unit cleaning Lens cleaningMain unit cleaning Lamp went out during use, or won’t come on No powerPower went out during use Trouble indicationsBefore calling service personnel Speciﬁcation SpeciﬁcationsList of general speciﬁcations Separately sold productSpeciﬁcations List of supported signals RGB signalsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsPin assignment of Computer in & Monitor terminals Pin assignment Control terminalOthers