Loading batteries | CONTENTS |
15
Notes
Using batteries incorrectly can cause them to leak or burst. Strictly observe the following.
•Install the batteries with their + and – ends facing correctly.
•Do not charge, heat, disassemble, or short the batteries or throw them into a fire.
•Do not leave any exhausted batteries in the remote control.
•Do not mix different types of batteries or new and old batteries.
•When you will not be using the remote control for a prolonged period, take the batteries out of the remote control.
•When the remote control stops working or only works at very close range, replace all the batteries with new ones.
•When replacing the batteries, use longer life alkaline batteries.
•If a battery has leaked, carefully wipe off any residue inside the battery case before loading new batteries.
1 | Bottom side | Open the cover. | |
| |||
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
2 | Install the batteries. |
Make sure that the +/– polarities match the |
illustration in the compartment.
Before use
3 | Attach the cover. |
|