Toshiba TLP780E owner manual Operating a computer by the remote control

Operating a computer by the remote control CONTENTS 42

You can control a computer by the remote control when the projector and computer are connected with the supplied USB cable. In this manual, this function is explained as “mouse remote control”.

			Remote control				Point the remote control at the remote control
							sensor on the projector when operating its buttons.
			INPUT	LASER	ON/STANDBY		•	To move the pointer
				AUTO				Press the outer side of the pointer control button
			KEYSTONE		SET			in the direction in which you want to move the
USB	OUT	( Y/PB/PR )	COMPUTER IN 2
	MONITOR	COMPUTER IN 1						pointer. (The speed at which the pointer moves
	CONTROL
						Pointer control		depends on how strongly the button is pressed.)
		AUDIO	VIDEO IN				•	To click
		IN R - AUDIO - L	VIDEO S-VIDEO			R-CLICK		Press L-CLICKor the center of the pointer
			L-CLICK		R-CLICK
			VOLUME/ADJUST			L-CLICK		control.
							•	To right-click
								Press R-CLICK.
							•	To drag and drop
			MENU	ENTER EXIT				While holding down the center of the pointer
			PIP	FREEZE				control, press the rim side to move the pointer to
			CALL	MUTE	RESIZE			the desired spot, then release the center part.
								Computer
			USB cable (supplied)

To USB connector	To USB port
Be sure to connect in the proper
direction.

Notes

•This function is available with Windows98 and Mac OS9 computers equipped with a USB port as standard.

•When connecting to the computer’s USB port for the first time, a message asking you to insert the Windows98 CD-ROM may appear on the computer’s monitor screen, depending on whether or not the device driver is installed. If so, do as the message says.

•When using a USB cable other than the supplied one, be sure to use a shielded type.

Operations