Toshiba TLP780E owner manual Power Sources, Source of Light, Ventilation

Page 4

IMPORTANT SAFETY INSTRUCTIONS

CONTENTS

4

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1.Read Owner’s Manual

After unpacking this product, read the owner’s manual carefully, and follow all the operating and other instructions.

2.Power Sources

This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

For products intended to operate from battery power, or other sources, refer to the operating instructions.

3.Source of Light

Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes or sight.

4.Ventilation

Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

Before use

Continued

Image 4

Contents TLP780E TLP781E Safety Precautions Avoid Volatile Liquid Save Original Packing MaterialsMoisture Condensation Source of Light Power SourcesVentilation Important Safety Instructions Accessories Object and Liquid EntryDo not place the product vertically Stack InhibitedDamage Requiring Service Replacement PartsSafety Check ServicingDo not carry by the camera arm Do not move the projector while the arm is still erectDo not look into the arm light while it is lit Strong light may cause damage to your eyes or sightPower supply cord selection Contents Explanation here is only for the model without the document Names of each part on the main unitRefer to Top side Names of each part on the main unitMenu button Input button Right side Names of each part on the remote control Install the batteries Loading batteriesOpen the cover Attach the coverFront side Remote control operationRear side Floor-mounted projector placement ViewerTop view Determine the screen size projected on the screenSide view Connect the power cord Light Orange Power cord SuppliedTake off the lens cover Insert the other end into a wall outletProjector placement angle adjustment Foot adjuster Foot adjuster release buttonLift up Lower Turn clockwise to lift up Turn counterclockwise to lowerCeiling-mounted projector placement Viewer Translucent screenConnecting a computer Computer in 1 connector Connecting a computer Computer in 2 connector Connecting video equipment Connectionsand Projector operation control by a computer ComputerHow to use the output connector Remote control Projection on the screenPress ON/STANDBY Lamp lights and the start up display appearsTurn on the connected equipment and put it in playback mode Press Enter to confirmControl panel Main unit side LanguageSelect the input source by pressing Input repeatedly Press Input and hold for two secondsPress Enter Input source selection menu appearsAdjust the picture size by turning Focusing ringStill picture is recommended for focusing Zooming leverPress VOL/ADJ +/- to adjust volume About the LCD PanelTurning the power off Press ON/STANDBY after using the projectorPress ON/STANDBY again Control panelAdjusting the picture automatically Input full screen video signals from the inputSource computer and project the image Press Auto SETPress Keystone Correcting the keystone distortionConfirm the keystone distortion Keystone adjustment finishes After confirming that V-keystone is selected on the menuIcon appears in the mute mode Cutting off the picture and sound temporarilyPress Mute Sound and picture are cut off temporarilyIcon appears in the freeze mode Freezing the picturePress Freeze Picture freezesEnlarging the picture size Icon appears in the resize modePress Resize Press PIP Displaying PIP Sub-picturesSub-picture is displayed Displaying Information Press CallOperating a computer by the remote control Operating the menu screen Press MenuPress Menu once again Select the item with the selection ButtonsAdjust with VOL/ADJ + Select the item with selection buttonsEnter Press Enter Press EnterGuide Menu adjustments and settings ShutterFull Menu adjustments and settings Picture Full Menu adjustments Position Full Menu adjustments Color Full Menu adjustments and settings Audio Full Menu adjustments and settings Display Settings AdjustmentsFull Menu settings Default setting Full Menu settings Reset Reset allPIP menu setting ImagingDocument camera Preparation of the document imaging camera Set a document to be projected Press ARM LightCamera head over them Press Camera to select the camera input mode Move the camera head to adjust the size of the pictureWhen finished, turn off the light and close it Press Camera Gain +/- to improve view of aCamera subject which is too dark or vivid Put back the armOverlaying projection Balance Press W.BALANCE to turn the Lock indicator Locking the white balanceProject a white paper and enlarge it to fill ScreenCorrecting illuminated defects With the document camera operating, fullyCover the camera lens with a piece of black Paper or clothTrouble indications Main unit sideAir filter cleaning Unplug the power cord Take off the air filter coverClean the air filter Detach the air filterMount the air filter cover Assemble the air filterAir filter Air filter cover Lens and main unit cleaning Cleaning the lensCleaning the main unit Replacing the intake, exhaust fans and air filterLamp replacement Unplug the power cord Wait until the lamp gets cool enoughTake off the lamp cover on the bottom panel Pull out the lampReset the lamp timer Load a new lampAttach the lamp cover Slide the cover into place and tighten the two screwsBefore calling service personal Symptom Cause CorrectionBefore calling service personal Mini D-sub 15pin Connector Do not connect anythingApplicable signal Applicable computer signalSignal Timing Horizontal Signal Timing Vertical Timing chartCompatible Video and S-Video signal Applicable signalCompatible components video signal Y/PB/PR Signal assignment of RS-232C Interface format Controlling the projector by using RS-232CCommand list Controlling the projector by using RS-232C VCL MO0 MS0 PIP Specifications Main unitLiquid crystal display Projection lensSpecifications AccessoriesReplacement lamp Sold separately