Toshiba TLP780E owner manual Before calling service personal

Page 69

Before calling service personal (continued)

CONTENTS

69

Symptom

 

Cause

Correction

Page

The color is faint.

The “Color”, “Tint”, “R-Level”, “G-Level” or “B-Level” adjustments

Make the “Picture” adjustments.

48

The tint is not good.

 

are not correct.

 

 

 

The lamp life is ending.

Replace the lamp.

66

The remote control does not

The remote control is not facing the remote sensor.

Face the remote control transmitter toward the remote

16

work.

 

 

sensor on the projector.

 

 

The remote control is too far away.

Operate within about 5 meters.

16

 

• There is an obstruction between the remote control and the

Remove the obstacle.

 

 

remote sensor.

 

 

 

The batteries are exhausted.

Replace the batteries.

15

Mouse function cannot be used

The USB cable is not properly connected.

Connect the USB cable properly.

42

from the remote control unit.

• The computer or OS is not compatible.

The remote control mouse function is not available.

 

The batteries are exhausted.

Replace the batteries.

15

Document camera image is

The lens is dirty.

Clean the lens with a blower or lens cleaner, etc.

65

blurry.

The picture is out of focus.

Focus the picture by turning the focus ring.

57

 

The light is not on.

Turn on the light.

56

Document camera image

Image is being affected by fluorescent light in the room.

Set the shutter speed on the menu screen.

45

flickers.

 

 

 

 

Document camera image

The image’s number of frames is low. This is not a malfunction.

 

 

movement is awkward.

 

 

 

 

Horizontal stripes appear

The image’s number of frames is low. This is not a malfunction.

 

 

when document projected with

 

 

 

 

the document camera is

 

 

 

 

moved.

 

 

 

 

 

 

 

 

 

Others

Image 69
Contents TLP780E TLP781E Safety Precautions Save Original Packing Materials Avoid Volatile LiquidMoisture Condensation Power Sources Source of LightVentilation Important Safety Instructions Object and Liquid Entry AccessoriesDo not place the product vertically Stack InhibitedReplacement Parts Damage Requiring ServiceSafety Check ServicingDo not move the projector while the arm is still erect Do not carry by the camera armDo not look into the arm light while it is lit Strong light may cause damage to your eyes or sightPower supply cord selection Contents Names of each part on the main unit Explanation here is only for the model without the documentRefer to Names of each part on the main unit Top sideMenu button Input button Right side Names of each part on the remote control Loading batteries Install the batteriesOpen the cover Attach the coverRemote control operation Front sideRear side Viewer Floor-mounted projector placementDetermine the screen size projected on the screen Top viewSide view Light Orange Power cord Supplied Connect the power cordTake off the lens cover Insert the other end into a wall outletFoot adjuster Foot adjuster release button Projector placement angle adjustmentLift up Lower Turn clockwise to lift up Turn counterclockwise to lowerViewer Translucent screen Ceiling-mounted projector placementConnecting a computer Computer in 1 connector Connecting a computer Computer in 2 connector Connecting video equipment Connectionsand Computer Projector operation control by a computerHow to use the output connector Projection on the screen Remote controlPress ON/STANDBY Lamp lights and the start up display appearsPress Enter to confirm Turn on the connected equipment and put it in playback modeControl panel Main unit side LanguagePress Input and hold for two seconds Select the input source by pressing Input repeatedlyPress Enter Input source selection menu appearsFocusing ring Adjust the picture size by turningStill picture is recommended for focusing Zooming leverAbout the LCD Panel Press VOL/ADJ +/- to adjust volumePress ON/STANDBY after using the projector Turning the power offPress ON/STANDBY again Control panelInput full screen video signals from the input Adjusting the picture automaticallySource computer and project the image Press Auto SETCorrecting the keystone distortion Press KeystoneConfirm the keystone distortion After confirming that V-keystone is selected on the menu Keystone adjustment finishesCutting off the picture and sound temporarily Icon appears in the mute modePress Mute Sound and picture are cut off temporarilyFreezing the picture Icon appears in the freeze modePress Freeze Picture freezesIcon appears in the resize mode Enlarging the picture sizePress Resize Displaying PIP Sub-pictures Press PIPSub-picture is displayed Press Call Displaying InformationOperating a computer by the remote control Press Menu Operating the menu screenPress Menu once again Select the item with the selection ButtonsSelect the item with selection buttons Adjust with VOL/ADJ +Enter Press Enter Press EnterShutter Guide Menu adjustments and settingsFull Menu adjustments and settings Picture Full Menu adjustments Position Full Menu adjustments Color Full Menu adjustments and settings Audio Settings Adjustments Full Menu adjustments and settings DisplayFull Menu settings Default setting Reset all Full Menu settings ResetPIP menu setting ImagingDocument camera Preparation of the document imaging camera Press ARM Light Set a document to be projectedCamera head over them Move the camera head to adjust the size of the picture Press Camera to select the camera input modePress Camera Gain +/- to improve view of a When finished, turn off the light and close itCamera subject which is too dark or vivid Put back the armOverlaying projection Locking the white balance Balance Press W.BALANCE to turn the Lock indicatorProject a white paper and enlarge it to fill ScreenWith the document camera operating, fully Correcting illuminated defectsCover the camera lens with a piece of black Paper or clothMain unit side Trouble indicationsUnplug the power cord Take off the air filter cover Air filter cleaningClean the air filter Detach the air filterAssemble the air filter Mount the air filter coverAir filter Air filter cover Cleaning the lens Lens and main unit cleaningCleaning the main unit Replacing the intake, exhaust fans and air filterUnplug the power cord Wait until the lamp gets cool enough Lamp replacementTake off the lamp cover on the bottom panel Pull out the lampLoad a new lamp Reset the lamp timerAttach the lamp cover Slide the cover into place and tighten the two screwsSymptom Cause Correction Before calling service personalBefore calling service personal Do not connect anything Mini D-sub 15pin ConnectorApplicable computer signal Applicable signalSignal Timing Horizontal Signal Timing Vertical Timing chartApplicable signal Compatible Video and S-Video signalCompatible components video signal Y/PB/PR Controlling the projector by using RS-232C Signal assignment of RS-232C Interface formatCommand list Controlling the projector by using RS-232C VCL MO0 MS0 PIP Main unit SpecificationsLiquid crystal display Projection lensAccessories SpecificationsReplacement lamp Sold separately