Toshiba TLP780E Projector placement angle adjustment, Foot adjuster Foot adjuster release button

Page 20

Projector placement angle adjustment

The tilt of the projector can be adjusted using the foot adjuster.

CONTENTS

Foot adjuster

Foot adjuster release button

Lift the front of the projector until the desired tilt angle is obtained and hold down the foot adjuster release button.

The foot adjuster will extend.

Release the button to lock in position.

connectionsInstallation and

Lift up Lower

Turn the foot adjuster to make fine adjustment to the height.

Turn clockwise to lift up.

Turn counterclockwise to lower.

Notes

•To put the foot adjuster back, hold down the foot adjuster release button and lower the front slowly.

•Be sure to hold the projector when putting the foot adjuster back so as not to let the front fall on your fingers.

•Do not tilt the projector at an angle exceeding the range adjustable by the foot adjusters, since the life duration of the lamp may be shortened.

Image 20

Contents TLP780E TLP781E Safety Precautions Moisture Condensation Save Original Packing MaterialsAvoid Volatile Liquid Ventilation Power SourcesSource of Light Important Safety Instructions Accessories Object and Liquid EntryDo not place the product vertically Stack InhibitedDamage Requiring Service Replacement PartsSafety Check ServicingDo not carry by the camera arm Do not move the projector while the arm is still erectDo not look into the arm light while it is lit Strong light may cause damage to your eyes or sightPower supply cord selection Contents Refer to Names of each part on the main unitExplanation here is only for the model without the document Menu button Input button Names of each part on the main unitTop side Right side Names of each part on the remote control Install the batteries Loading batteriesOpen the cover Attach the coverRear side Remote control operationFront side Floor-mounted projector placement ViewerSide view Determine the screen size projected on the screenTop view Connect the power cord Light Orange Power cord SuppliedTake off the lens cover Insert the other end into a wall outletProjector placement angle adjustment Foot adjuster Foot adjuster release buttonLift up Lower Turn clockwise to lift up Turn counterclockwise to lowerCeiling-mounted projector placement Viewer Translucent screenConnecting a computer Computer in 1 connector Connecting a computer Computer in 2 connector Connecting video equipment Connectionsand Projector operation control by a computer ComputerHow to use the output connector Remote control Projection on the screenPress ON/STANDBY Lamp lights and the start up display appearsTurn on the connected equipment and put it in playback mode Press Enter to confirmControl panel Main unit side LanguageSelect the input source by pressing Input repeatedly Press Input and hold for two secondsPress Enter Input source selection menu appearsAdjust the picture size by turning Focusing ringStill picture is recommended for focusing Zooming leverPress VOL/ADJ +/- to adjust volume About the LCD PanelTurning the power off Press ON/STANDBY after using the projectorPress ON/STANDBY again Control panelAdjusting the picture automatically Input full screen video signals from the inputSource computer and project the image Press Auto SETConfirm the keystone distortion Correcting the keystone distortionPress Keystone Keystone adjustment finishes After confirming that V-keystone is selected on the menuIcon appears in the mute mode Cutting off the picture and sound temporarilyPress Mute Sound and picture are cut off temporarilyIcon appears in the freeze mode Freezing the picturePress Freeze Picture freezesPress Resize Icon appears in the resize modeEnlarging the picture size Sub-picture is displayed Displaying PIP Sub-picturesPress PIP Displaying Information Press CallOperating a computer by the remote control Operating the menu screen Press MenuPress Menu once again Select the item with the selection ButtonsAdjust with VOL/ADJ + Select the item with selection buttonsEnter Press Enter Press EnterGuide Menu adjustments and settings ShutterFull Menu adjustments and settings Picture Full Menu adjustments Position Full Menu adjustments Color Full Menu adjustments and settings Audio Full Menu adjustments and settings Display Settings AdjustmentsFull Menu settings Default setting Full Menu settings Reset Reset allPIP menu setting ImagingDocument camera Preparation of the document imaging camera Camera head over them Press ARM LightSet a document to be projected Press Camera to select the camera input mode Move the camera head to adjust the size of the pictureWhen finished, turn off the light and close it Press Camera Gain +/- to improve view of aCamera subject which is too dark or vivid Put back the armOverlaying projection Balance Press W.BALANCE to turn the Lock indicator Locking the white balanceProject a white paper and enlarge it to fill ScreenCorrecting illuminated defects With the document camera operating, fullyCover the camera lens with a piece of black Paper or clothTrouble indications Main unit sideAir filter cleaning Unplug the power cord Take off the air filter coverClean the air filter Detach the air filterAir filter Air filter cover Assemble the air filterMount the air filter cover Lens and main unit cleaning Cleaning the lensCleaning the main unit Replacing the intake, exhaust fans and air filterLamp replacement Unplug the power cord Wait until the lamp gets cool enoughTake off the lamp cover on the bottom panel Pull out the lampReset the lamp timer Load a new lampAttach the lamp cover Slide the cover into place and tighten the two screwsBefore calling service personal Symptom Cause CorrectionBefore calling service personal Mini D-sub 15pin Connector Do not connect anythingApplicable signal Applicable computer signalSignal Timing Horizontal Signal Timing Vertical Timing chartCompatible components video signal Y/PB/PR Applicable signalCompatible Video and S-Video signal Command list Controlling the projector by using RS-232CSignal assignment of RS-232C Interface format Controlling the projector by using RS-232C VCL MO0 MS0 PIP Specifications Main unitLiquid crystal display Projection lensSpecifications AccessoriesReplacement lamp Sold separately