Toshiba TLP780E owner manual Connecting video equipment

Page 24

Connecting video equipment

CONTENTS

You can project the picture from video equipment by using VIDEO IN connectors.

Check that the power supplies for the projector and for the video equipment are off before connecting the cables.

USB	MONITOR	COMPUTER IN 1		COMPUTER IN 2
	OUT	( Y/PB/PR )
	CONTROL
		AUDIO		VIDEO IN
		IN	R - AUDIO - L	VIDEO S-VIDEO

24

connectionsInstallation and

To S-VIDEO connector

Be sure to connect in the proper direction.

To S-video output

S-video cable (not supplied)

(Red) To AUDIO-R jack
(White) To AUDIO-L jack (Yellow) To VIDEO jack	AV cable (supplied)
(White) To AUDIO-L jack (Yellow) To VIDEO jack

Video equipment

Pin plug (red)

To audio output (R)

Pin plug (white)

To audio output (L)

Pin plug (yellow)

To video output

Note

The S-VIDEO connector and VIDEO jack can be used independently, but the audio input jacks are used as both the S-VIDEO and VIDEO input.

Continued

Image 24

Contents TLP780E TLP781E Safety Precautions Save Original Packing Materials Avoid Volatile LiquidMoisture Condensation Power Sources Source of LightVentilation Important Safety Instructions Accessories Object and Liquid EntryDo not place the product vertically Stack InhibitedDamage Requiring Service Replacement PartsSafety Check ServicingDo not carry by the camera arm Do not move the projector while the arm is still erectDo not look into the arm light while it is lit Strong light may cause damage to your eyes or sightPower supply cord selection Contents Names of each part on the main unit Explanation here is only for the model without the documentRefer to Names of each part on the main unit Top sideMenu button Input button Right side Names of each part on the remote control Install the batteries Loading batteriesOpen the cover Attach the coverRemote control operation Front sideRear side Floor-mounted projector placement ViewerDetermine the screen size projected on the screen Top viewSide view Connect the power cord Light Orange Power cord SuppliedTake off the lens cover Insert the other end into a wall outletProjector placement angle adjustment Foot adjuster Foot adjuster release buttonLift up Lower Turn clockwise to lift up Turn counterclockwise to lowerCeiling-mounted projector placement Viewer Translucent screenConnecting a computer Computer in 1 connector Connecting a computer Computer in 2 connector Connecting video equipment Connectionsand Projector operation control by a computer ComputerHow to use the output connector Remote control Projection on the screenPress ON/STANDBY Lamp lights and the start up display appearsTurn on the connected equipment and put it in playback mode Press Enter to confirmControl panel Main unit side LanguageSelect the input source by pressing Input repeatedly Press Input and hold for two secondsPress Enter Input source selection menu appearsAdjust the picture size by turning Focusing ringStill picture is recommended for focusing Zooming leverPress VOL/ADJ +/- to adjust volume About the LCD PanelTurning the power off Press ON/STANDBY after using the projectorPress ON/STANDBY again Control panelAdjusting the picture automatically Input full screen video signals from the inputSource computer and project the image Press Auto SETCorrecting the keystone distortion Press KeystoneConfirm the keystone distortion Keystone adjustment finishes After confirming that V-keystone is selected on the menuIcon appears in the mute mode Cutting off the picture and sound temporarilyPress Mute Sound and picture are cut off temporarilyIcon appears in the freeze mode Freezing the picturePress Freeze Picture freezesIcon appears in the resize mode Enlarging the picture sizePress Resize Displaying PIP Sub-pictures Press PIPSub-picture is displayed Displaying Information Press CallOperating a computer by the remote control Operating the menu screen Press MenuPress Menu once again Select the item with the selection ButtonsAdjust with VOL/ADJ + Select the item with selection buttonsEnter Press Enter Press EnterGuide Menu adjustments and settings ShutterFull Menu adjustments and settings Picture Full Menu adjustments Position Full Menu adjustments Color Full Menu adjustments and settings Audio Full Menu adjustments and settings Display Settings AdjustmentsFull Menu settings Default setting Full Menu settings Reset Reset allPIP menu setting ImagingDocument camera Preparation of the document imaging camera Press ARM Light Set a document to be projectedCamera head over them Press Camera to select the camera input mode Move the camera head to adjust the size of the pictureWhen finished, turn off the light and close it Press Camera Gain +/- to improve view of aCamera subject which is too dark or vivid Put back the armOverlaying projection Balance Press W.BALANCE to turn the Lock indicator Locking the white balanceProject a white paper and enlarge it to fill ScreenCorrecting illuminated defects With the document camera operating, fullyCover the camera lens with a piece of black Paper or clothTrouble indications Main unit sideAir filter cleaning Unplug the power cord Take off the air filter coverClean the air filter Detach the air filterAssemble the air filter Mount the air filter coverAir filter Air filter cover Lens and main unit cleaning Cleaning the lensCleaning the main unit Replacing the intake, exhaust fans and air filterLamp replacement Unplug the power cord Wait until the lamp gets cool enoughTake off the lamp cover on the bottom panel Pull out the lampReset the lamp timer Load a new lampAttach the lamp cover Slide the cover into place and tighten the two screwsBefore calling service personal Symptom Cause CorrectionBefore calling service personal Mini D-sub 15pin Connector Do not connect anythingApplicable signal Applicable computer signalSignal Timing Horizontal Signal Timing Vertical Timing chartApplicable signal Compatible Video and S-Video signalCompatible components video signal Y/PB/PR Controlling the projector by using RS-232C Signal assignment of RS-232C Interface formatCommand list Controlling the projector by using RS-232C VCL MO0 MS0 PIP Specifications Main unitLiquid crystal display Projection lensSpecifications AccessoriesReplacement lamp Sold separately