Preparation of the document imaging camera | CONTENTS | ||
Before preparations | 1) Raise up the arm. | 2) Extend the arm. | 3) Turn the arm. |
(stowed away) |
|
|
|
4) Open the camera head. | 5) Turn the camera head. | 6) Pull up the light. | 7) Turn the light. |
Notes
•Never give shocks or impacts to the camera or arm as this may cause malfunction.
•While raising up or turning the arm, the arm moves describing an arc, be careful not to hit your face or your body.
•The figures above are procedures of putting materials on the projector. When the stability of materials is required or the light of the indicator is visible through the materials, place the materials at the back of the projector and set the arm and camera head over them.
55