Toshiba GN-1060 manual Enter the following items and press Next, EAP User Name

Page 26

1 SETTING UP WIRELESS NETWORK

3 Enter the following items and press [NEXT].

y[EAP USER NAME]

Press this to enter the EAP user name that is used for the authentication.

In the EAP USER NAME, enter the user name in “User Name@FQDN” format.

Example: wlanuser@example.com

y[EAP PASSWORD]

Press this to enter the EAP password that is used for the authentication.

y[RETYPE PASS]

Press this to enter the EAP password again that you enter in the EAP PASSWORD field.

When pressing each button, the letter entry screen is displayed. Enter the value using the keyboard and digital keys, and press [OK] to set the entry.

4 Specify the following items and press [NEXT].

yENCRYPTION BETWEEN AP AND STA.

Select the encryption type that is used for the communication between Access Point and this equipment.

[TKIP] — Select this to use TKIP encryption. TKIP provides a different key for per packet with a message integrity check. This key will be changed for every fixed interval.

[AES(CCMP)] — Select this to use AES encryption. AES is the next-generation cryptography algorithm that the U.S. government improves to replace the DES and 3DES.

[DYNAMIC WEP] — Select this to use an encryption which automatically updates the WEP key. DYNAMIC WEP does so periodically as well as automatically.

To select [TKIP] or [AES (CCMP)], press [WPA] or [WPA2], or to select [DYNAMIC WEP], press [802.1X].

The encryption intensity between each encryption is:

AES(CCMP) > TKIP > DYNAMIC WEP

24 Setting Up the Infrastructure Mode

Image 26

Contents Operators Manual for Wireless LAN Module Page ‰ Model and series names in this manual „ How to read this manual ‰ Symbols in this manualPreface ‰ Options‰ Trademarks „ About Toshiba Wireless Solution Precautions„ Precautions for Use ‰ Wireless Interoperability‰ Europe EU Declaration of Conformity ‰ Regulatory Information‰ Canada Industry Canada IC EN 300‰ USA-Federal Communications Commission FCC Labelling‰ Regulatory Notice for Channel Use in France „ NotesContents Contents Setting up the Ad Hoc Mode Before Setting Up Wireless NetworkSetting Up the Infrastructure Mode Disabling Wireless NetworkInfrastructure Mode Before Setting Up Wireless Network„ Planning for installation Ad Hoc ModeWPA/WPA2/802.1X ‰ Determine the security mode‰ Determine the Ssid WEP Enter the administrator password and press OK Setting Up the Infrastructure ModePress Password „ Select network typePress Wireless Setting Press on and press NextSetting Up the Infrastructure Mode Press Available Network „ Specify Ssid‰ Selecting the Ssid from the available network list ‰ Entering the Ssid manually Press SsidScreen returns to the Ssid Settings screen Press EAP-TLS and press Next „ Select security modePress WPA, WPA2 or 802.1X, and then Next Press Disable and press EAP User Name Press NextSpecify the following items and press Next Encryption Between AP and STAConfirm the settings and press Finish Press YES, and wait until the setting is reflected‰ Selecting WPA/WPA2/802.1X security mode with Peap protocol Press Peap and press NextEnter the following items and press Next EAP User NameConfirm the settings and press Finish ‰ Selecting WPAPSK/WPA2PSK security mode Press Wpapsk or WPA2PSK and press NextSpecify the following items and press Next ‰ Selecting WEP security mode Press WEP button and press NextSpecify the following items and press Next ‰ Selecting no security mode Press None and press NextPress YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Select the transmit power and press Next button Confirm the settings and press Finish buttonPress YES, and wait until the setting is reflected Disabling Wireless Network Press Password buttonPress OFF and press Next Specification Troubleshooting Glossary AppendixSpecification DescriptionWhen Cannot Connect to Toshiba MFP TroubleshootingWhen Error Messages are Displayed Glossary Index NumericsIndex GN-1060 OME100082C0 GN-1060