Toshiba GN-1060 manual Press OFF and press Next

Page 44

1 SETTING UP WIRELESS NETWORK

6 Press [WIRELESS SETTING].

The WIRELESS SETTING screen is displayed.

7 Press [OFF] and press [NEXT].

The WIRELESS SETTING CHECK screen is displayed.

8

9

Press [FINISH].

Press [YES], and wait until the setting is reflected.

42 Disabling Wireless Network

Image 44

Contents Operators Manual for Wireless LAN Module Page „ How to read this manual ‰ Symbols in this manual Preface‰ Model and series names in this manual ‰ Options‰ Trademarks Precautions „ Precautions for Use„ About Toshiba Wireless Solution ‰ Wireless Interoperability‰ Regulatory Information ‰ Canada Industry Canada IC‰ Europe EU Declaration of Conformity EN 300‰ USA-Federal Communications Commission FCC Labelling‰ Regulatory Notice for Channel Use in France „ NotesContents Contents Before Setting Up Wireless Network Setting Up the Infrastructure ModeSetting up the Ad Hoc Mode Disabling Wireless NetworkBefore Setting Up Wireless Network „ Planning for installationInfrastructure Mode Ad Hoc ModeWPA/WPA2/802.1X ‰ Determine the security mode‰ Determine the Ssid WEP Setting Up the Infrastructure Mode Press PasswordEnter the administrator password and press OK „ Select network typePress Wireless Setting Press on and press NextSetting Up the Infrastructure Mode Press Available Network „ Specify Ssid‰ Selecting the Ssid from the available network list ‰ Entering the Ssid manually Press SsidScreen returns to the Ssid Settings screen Press EAP-TLS and press Next „ Select security modePress WPA, WPA2 or 802.1X, and then Next Press Disable and press EAP User Name Press NextSpecify the following items and press Next Encryption Between AP and STAConfirm the settings and press Finish Press YES, and wait until the setting is reflected‰ Selecting WPA/WPA2/802.1X security mode with Peap protocol Press Peap and press NextEnter the following items and press Next EAP User NameConfirm the settings and press Finish ‰ Selecting WPAPSK/WPA2PSK security mode Press Wpapsk or WPA2PSK and press NextSpecify the following items and press Next ‰ Selecting WEP security mode Press WEP button and press NextSpecify the following items and press Next ‰ Selecting no security mode Press None and press NextPress YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Select the transmit power and press Next button Confirm the settings and press Finish buttonPress YES, and wait until the setting is reflected Disabling Wireless Network Press Password buttonPress OFF and press Next Specification Troubleshooting Glossary AppendixSpecification DescriptionWhen Cannot Connect to Toshiba MFP TroubleshootingWhen Error Messages are Displayed Glossary Index NumericsIndex GN-1060 OME100082C0 GN-1060