Toshiba GN-1060 Selecting WPAPSK/WPA2PSK security mode, Press Wpapsk or WPA2PSK and press Next

Page 28

1 SETTING UP WIRELESS NETWORK

Selecting WPAPSK/WPA2PSK security mode

The WPAPSK/WPA2PSK is an authentication method using the PSK (Pre-Shared Key) between the Access Point and other wireless devices.

To access the wireless network using the WPAPSK/WPA2PSK authentication, the same PSK Path Phrase must be assigned in both the Access Point and other wireless devices. If the PSKs are same between the Access Point and other wireless devices, the Access Point allows them to access the wireless network through the Access Point.

1 Press [WPAPSK] or [WPA2PSK] and press [NEXT].

The WIRELESS ENCRYPTION WPAPSK/WPA2PSK screen is displayed.

2 Enter the following items and press [NEXT].

yWIRELESS ENCRYPTION TYPE Select the encryption type for the PSK.

[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message integrity check. This key will be changed for every fixed interval.

[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that the U.S. government improves to replace the DES and 3DES.

y[PSK PASS PHRASE]

Press this to enter the PSK Pass Phrase. The PSK is created by using the this pass phrase. You must enter the same pass phrase that is set in the Access Point. The PSK Pass Phrase must be between 8 to 63 characters long.

When pressing [PSK PASS PHRASE], the letter entry screen is displayed. Enter the value using the keyboard and digital keys, and press [OK] to set the entry.

26 Setting Up the Infrastructure Mode

Image 28

Contents Operators Manual for Wireless LAN Module Page „ How to read this manual ‰ Symbols in this manual Preface‰ Model and series names in this manual ‰ Options‰ Trademarks Precautions „ Precautions for Use„ About Toshiba Wireless Solution ‰ Wireless Interoperability‰ Regulatory Information ‰ Canada Industry Canada IC‰ Europe EU Declaration of Conformity EN 300‰ USA-Federal Communications Commission FCC Labelling‰ Regulatory Notice for Channel Use in France „ NotesContents Contents Before Setting Up Wireless Network Setting Up the Infrastructure ModeSetting up the Ad Hoc Mode Disabling Wireless NetworkBefore Setting Up Wireless Network „ Planning for installationInfrastructure Mode Ad Hoc Mode‰ Determine the Ssid ‰ Determine the security modeWPA/WPA2/802.1X WEP Setting Up the Infrastructure Mode Press PasswordEnter the administrator password and press OK „ Select network typePress Wireless Setting Press on and press NextSetting Up the Infrastructure Mode ‰ Selecting the Ssid from the available network list „ Specify SsidPress Available Network ‰ Entering the Ssid manually Press SsidScreen returns to the Ssid Settings screen Press WPA, WPA2 or 802.1X, and then Next „ Select security modePress EAP-TLS and press Next Press Disable and press EAP User Name Press NextSpecify the following items and press Next Encryption Between AP and STAConfirm the settings and press Finish Press YES, and wait until the setting is reflected‰ Selecting WPA/WPA2/802.1X security mode with Peap protocol Press Peap and press NextEnter the following items and press Next EAP User NameConfirm the settings and press Finish ‰ Selecting WPAPSK/WPA2PSK security mode Press Wpapsk or WPA2PSK and press NextSpecify the following items and press Next ‰ Selecting WEP security mode Press WEP button and press NextSpecify the following items and press Next ‰ Selecting no security mode Press None and press NextPress YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Select the transmit power and press Next button Confirm the settings and press Finish buttonPress YES, and wait until the setting is reflected Disabling Wireless Network Press Password buttonPress OFF and press Next Specification Troubleshooting Glossary AppendixSpecification DescriptionWhen Error Messages are Displayed TroubleshootingWhen Cannot Connect to Toshiba MFP Glossary Index NumericsIndex GN-1060 OME100082C0 GN-1060