Toshiba GN-1060 manual Specify the following items and press Next

Page 31

1 SETTING UP WIRELESS NETWORK

3 Specify the following items and press [NEXT].

yTRANSMIT POWER

Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%].

4 Confirm the settings and press [FINISH].

If you want to change the settings, press [PREV] to move back to the screen that you want to change and then repeat the operation.

5 Press [YES], and wait until the setting is reflected.

Setting Up the Infrastructure Mode 29

Image 31

Contents Operators Manual for Wireless LAN Module Page ‰ Options „ How to read this manual ‰ Symbols in this manualPreface ‰ Model and series names in this manual‰ Trademarks ‰ Wireless Interoperability Precautions„ Precautions for Use „ About Toshiba Wireless SolutionEN 300 ‰ Regulatory Information‰ Canada Industry Canada IC ‰ Europe EU Declaration of ConformityLabelling ‰ USA-Federal Communications Commission FCC„ Notes ‰ Regulatory Notice for Channel Use in FranceContents Contents Disabling Wireless Network Before Setting Up Wireless NetworkSetting Up the Infrastructure Mode Setting up the Ad Hoc ModeAd Hoc Mode Before Setting Up Wireless Network„ Planning for installation Infrastructure Mode‰ Determine the Ssid ‰ Determine the security modeWPA/WPA2/802.1X WEP „ Select network type Setting Up the Infrastructure ModePress Password Enter the administrator password and press OKPress on and press Next Press Wireless SettingSetting Up the Infrastructure Mode ‰ Selecting the Ssid from the available network list „ Specify SsidPress Available Network Press Ssid ‰ Entering the Ssid manuallyScreen returns to the Ssid Settings screen Press WPA, WPA2 or 802.1X, and then Next „ Select security modePress EAP-TLS and press Next Press Next Press Disable and press EAP User NameEncryption Between AP and STA Specify the following items and press NextPress YES, and wait until the setting is reflected Confirm the settings and press FinishPress Peap and press Next ‰ Selecting WPA/WPA2/802.1X security mode with Peap protocolEAP User Name Enter the following items and press NextConfirm the settings and press Finish Press Wpapsk or WPA2PSK and press Next ‰ Selecting WPAPSK/WPA2PSK security modeSpecify the following items and press Next Press WEP button and press Next ‰ Selecting WEP security modeSpecify the following items and press Next Press None and press Next ‰ Selecting no security modePress YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Confirm the settings and press Finish button Select the transmit power and press Next buttonPress YES, and wait until the setting is reflected Press Password button Disabling Wireless NetworkPress OFF and press Next Appendix Specification Troubleshooting GlossaryDescription SpecificationWhen Error Messages are Displayed TroubleshootingWhen Cannot Connect to Toshiba MFP Glossary Numerics IndexIndex GN-1060 OME100082C0 GN-1060