Toshiba GN-1060 manual Wireless Setting screen is displayed

Page 35

1 SETTING UP WIRELESS NETWORK

5 Press [WIRELESS SETTING].

The WIRELESS SETTING menu is displayed.

6 Press [WIRELESS SETTING].

The WIRELESS SETTING screen is displayed.

7 Press [ON] and press [NEXT].

The NETWORK TYPE screen is displayed.

Setting up the Ad Hoc Mode 33

Image 35

Contents Operators Manual for Wireless LAN Module Page ‰ Options „ How to read this manual ‰ Symbols in this manualPreface ‰ Model and series names in this manual‰ Trademarks ‰ Wireless Interoperability Precautions„ Precautions for Use „ About Toshiba Wireless SolutionEN 300 ‰ Regulatory Information‰ Canada Industry Canada IC ‰ Europe EU Declaration of ConformityLabelling ‰ USA-Federal Communications Commission FCC„ Notes ‰ Regulatory Notice for Channel Use in FranceContents Contents Disabling Wireless Network Before Setting Up Wireless NetworkSetting Up the Infrastructure Mode Setting up the Ad Hoc ModeAd Hoc Mode Before Setting Up Wireless Network„ Planning for installation Infrastructure ModeWPA/WPA2/802.1X ‰ Determine the security mode‰ Determine the Ssid WEP „ Select network type Setting Up the Infrastructure ModePress Password Enter the administrator password and press OKPress on and press Next Press Wireless SettingSetting Up the Infrastructure Mode Press Available Network „ Specify Ssid‰ Selecting the Ssid from the available network list Press Ssid ‰ Entering the Ssid manuallyScreen returns to the Ssid Settings screen Press EAP-TLS and press Next „ Select security modePress WPA, WPA2 or 802.1X, and then Next Press Next Press Disable and press EAP User NameEncryption Between AP and STA Specify the following items and press NextPress YES, and wait until the setting is reflected Confirm the settings and press FinishPress Peap and press Next ‰ Selecting WPA/WPA2/802.1X security mode with Peap protocolEAP User Name Enter the following items and press NextConfirm the settings and press Finish Press Wpapsk or WPA2PSK and press Next ‰ Selecting WPAPSK/WPA2PSK security modeSpecify the following items and press Next Press WEP button and press Next ‰ Selecting WEP security modeSpecify the following items and press Next Press None and press Next ‰ Selecting no security modePress YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Confirm the settings and press Finish button Select the transmit power and press Next buttonPress YES, and wait until the setting is reflected Press Password button Disabling Wireless NetworkPress OFF and press Next Appendix Specification Troubleshooting GlossaryDescription SpecificationWhen Cannot Connect to Toshiba MFP TroubleshootingWhen Error Messages are Displayed Glossary Numerics IndexIndex GN-1060 OME100082C0 GN-1060