Toshiba GN-1060 manual Contents

Page 9

CONTENTS
Preface	1
Precautions	3
Chapter 1 SETTING UP WIRELESS NETWORK
Before Setting Up Wireless Network	10
Planning for installation	10
Determine the network type	10
Determine the SSID	11
Determine the security mode	11
Setting Up the Infrastructure Mode	13
Select network type	13
Specify SSID	16
Selecting the SSID from the available network list	16
Entering the SSID manually	17
Select security mode	19
Selecting WPA/WPA2/802.1X security mode with EAP-TLS protocol	19
Selecting WPA/WPA2/802.1X security mode with PEAP protocol	23
Selecting WPAPSK/WPA2PSK security mode	26
Selecting WEP security mode	28
Selecting no security mode	30
Setting up the Ad Hoc Mode	32
Select network type	32
Specify SSID	35
Select security mode	37
Selecting WEP security mode	37
Selecting no security mode	39
Disabling Wireless Network	41
Chapter 2 APPENDIX
Specification	44
Troubleshooting	45
Glossary	46
INDEX	47

CONTENTS 7

Image 9

Contents Operators Manual for Wireless LAN Module Page Preface „ How to read this manual ‰ Symbols in this manual‰ Model and series names in this manual ‰ Options‰ Trademarks „ Precautions for Use Precautions„ About Toshiba Wireless Solution ‰ Wireless Interoperability‰ Canada Industry Canada IC ‰ Regulatory Information‰ Europe EU Declaration of Conformity EN 300Labelling ‰ USA-Federal Communications Commission FCC„ Notes ‰ Regulatory Notice for Channel Use in FranceContents Contents Setting Up the Infrastructure Mode Before Setting Up Wireless NetworkSetting up the Ad Hoc Mode Disabling Wireless Network„ Planning for installation Before Setting Up Wireless NetworkInfrastructure Mode Ad Hoc Mode‰ Determine the security mode ‰ Determine the SsidWPA/WPA2/802.1X WEP Press Password Setting Up the Infrastructure ModeEnter the administrator password and press OK „ Select network typePress on and press Next Press Wireless SettingSetting Up the Infrastructure Mode „ Specify Ssid ‰ Selecting the Ssid from the available network listPress Available Network Press Ssid ‰ Entering the Ssid manuallyScreen returns to the Ssid Settings screen „ Select security mode Press WPA, WPA2 or 802.1X, and then NextPress EAP-TLS and press Next Press Next Press Disable and press EAP User NameEncryption Between AP and STA Specify the following items and press NextPress YES, and wait until the setting is reflected Confirm the settings and press FinishPress Peap and press Next ‰ Selecting WPA/WPA2/802.1X security mode with Peap protocolEAP User Name Enter the following items and press NextConfirm the settings and press Finish Press Wpapsk or WPA2PSK and press Next ‰ Selecting WPAPSK/WPA2PSK security modeSpecify the following items and press Next Press WEP button and press Next ‰ Selecting WEP security modeSpecify the following items and press Next Press None and press Next ‰ Selecting no security modePress YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Confirm the settings and press Finish button Select the transmit power and press Next buttonPress YES, and wait until the setting is reflected Press Password button Disabling Wireless NetworkPress OFF and press Next Appendix Specification Troubleshooting GlossaryDescription SpecificationTroubleshooting When Error Messages are DisplayedWhen Cannot Connect to Toshiba MFP Glossary Numerics IndexIndex GN-1060 OME100082C0 GN-1060