Toshiba GN-1010 manual

Page 18

—Using the GN-1010 as an access point on the existing LAN environment

The wireless LAN environment can be newly added to the existing LAN environ- ment.

The GN-1010 can communicate with a wireless client and a wired client.

Hub

•Purchase the hub (recommended model) separately.

•Use a straight cable which connects between the hub and the GN-1010. The straight cable is not included with this product.

•The recommended hub can be directly attached to the Multifunctional Digital Sys- tem.

For details, contact your TOSHIBA authorized dealer or service engineer.

•In the infrastructure (Wi-Fi mode), all the wireless terminals perform communica- tions via the access point.

Since the roaming function is supported, log-in to any access point where the radio waves are accessible.

GN-1010 User’s Manual — Operating Mode

17

Image 18

Contents Operators Manual About Toshiba Wireless Solution Handling PrecautionsPrecautions for USE Wireless LAN Adapter TypesWireless LAN and your Health Wireless LAN AdaptersWireless Interoperability Safety Instruction for Wireless ProductsLimitation of Liability Usage RestrictionsPage Regulatory Information Canada Industry Canada ICEurope EU Declaration of Conformity USA-Federal Communications Commission FCC ΜΕ ΤΗΝ Παρουσαtoshiba TEC ∆ΗΛΩΝΕΙ ΟΤΙ FX-DS110-APL GN-1010Precautions Related to Service Configuration List Before Using ProductProduct Configuration CD-ROMFeatures IntroductionTable of Contents Troubleshooting Functions of the Utility SoftwareAppendix Overview Component LocationsLED WRX LED IndicatorsPower LinkDIP Switches DIP Switch Default Setting Factory SettingFunction of DIP Switch Multi-channel Operation AP2Access Point AP Operating ModeInfrastructure Wi-Fi Mode Station STPage Connection with Cross Cable Using the Utility SoftwareConnecting between the GN-1010 and PC Connection with HubPreparing the Utility Software Node Registration Enter the access point name and click OK Click Exit to complete the detectionConfiguration Click Read to load the setting of the device Click OK Click the appropriate tab and edit the parametersFunctions of the Utility SOFT- Ware Main Menu ScreenNected to the same network group Configuration Screen Base ESS ID ANY IDWireless WSLWEP Classifi Parameter Default Description Extended Roaming AP2Extension Speed Control RssiFilter MACMAC Address Filter MAC Address Filter List File LogflistProtocol Filter Protocol Filter List File PrtflistGN-1010 User’s Manual Functions of the Utility Software Registered information is displayed on the MAC Address List GN-1010 User’s Manual Functions of the Utility Software Registered information is displayed on the Protocol List Snmp Spanning TreeFile Management Status Common ItemsEnvironment Interfaces MTUParameter Description Wireless Node RssiBridge Information of this tab is excluded from support Wireless Counter Check Peripheral Environment or Installation Location TroubleshootingWhen Communication Fails Check SoftwareWhen Device Does Not Start Check Power LEDPhysical Specifications Product SpecificationsExternal Dimensions AppendixSoftware Specification Input/Output InterfaceGlossary Bridge Spectrum Diffusion TransmissionChannel RouterPage Page Page GN-1010 Kanda NISHIKI-CHO, CHIYODA-KU, TOKYO, 101-8442, Japan