Status
This function periodically reads operational data including send and receive counters from the device specified in "Access Point" and displays it on the screen.
Common Items
1
2
3
4
5
6
7
1. | Access Point | Selects access point to obtain the status information. | |
2. | Interval | Sets the refresh interval to read information. (0 to 120 sec.) | |
3. | Information Tab | Status information items are organized into each tab. | |
4. | [Exit] | Returns to the main menu. | |
5. | [Scan Start] | Periodically reads and diplays information (the refresh | |
|
| interval is specified in “Interval”). | |
|
| * | When “Interval” is “0”, information is read only once. |
6. | [Stop] | Stops reading information. (Scan Stop) | |
7. | [Clear] | Clears the displayed information. | |
|
| * | You can operate this when scanning is stopped. |
|
| * | For the items without displaying [Clear], you cannot clear |
|
|
| information corresponding to them. |
44 |
|