Toshiba GN-1010 manual Filter, Mac

Filter

This tab performs the filter setting regarding MAC address and protocol.

Operation

Button

<Operation Button>

[New] .................. Creates new list.

[Delete]............... Deletes the list previously set.

[Open] ................ Opens the saved list file.

[Save] ................. Saves created list.

<Display Item>

Classifi-	Parameter	Default	Description
cation		Value
	Enable MAC	Disabled	Determines whether or not the MAC address filter is used.
	Address Fil-		• Enabled/Disabled
	ter (*1)		* When enabled, connection to another AP other than the
MAC			clients which has the permitted MAC address is refused.
Address	MAC	-	Displays the permitted MAC address list when “MAC
Filter	Address List		Address Filter“ is enabled. You can register or delete MAC
	(*1)		address, one by one, by [New] or [Delete] command. You
			can also load the batch list from the list file, and save a list
			as the list file. Up to 1024 addresses can be registered.
	Enable Pro-	Disabled	Determines whether or not the protocol filter is used.
	tocol		• Enabled/Disabled
	Filter		* When enabled, transmission of the packet other than pro-
Protocol			tocol is refused.
	Protocol List	-	Displays the permitted protocol list when “Protocol Filter“ is
Filter
			enabled. You can register or delete protocol, one by one, by
			[New] or [Delete] command. You can also load the batch list
			from the list file, and save a list as the list file. Up to 256
			protocols can be registered.

(*1) : Applied only to “access point”.

GN-1010 User’s Manual — Functions of the Utility Software 33