Toshiba GN-1010 manual Environment

Page 46

Environment

This tab displays device information including operating mode, version number, and IP address.

<Display Item>

Parameter	Description


Loader Version	Version number of program to execute firmware

Firmware Version	Version number of firmware

Firmware Version	Version number of wireless card firmware
(Wireless Card)

Hardware Version	Version number of hardware

Ethernet Address	Ethernet address assigned to this device

Wireless MAC Address	Wireless MAC address assigned to this device

IP Address	Current IP address of this device

Subnet Mask	Current subnet mask

Default Gateway	Current default gateway IP address

Network Mode	Current operating mode

Unit Type	Current unit type

Channel Number	Current wireless channel number

Card Type	Wireless card type

GN-1010 User’s Manual — Functions of the Utility Software

45

Image 46

Contents Operators Manual About Toshiba Wireless Solution Handling PrecautionsPrecautions for USE Wireless LAN Adapter TypesWireless LAN and your Health Wireless LAN AdaptersWireless Interoperability Safety Instruction for Wireless ProductsLimitation of Liability Usage RestrictionsPage Canada Industry Canada IC Regulatory InformationEurope EU Declaration of Conformity USA-Federal Communications Commission FCC ΜΕ ΤΗΝ Παρουσαtoshiba TEC ∆ΗΛΩΝΕΙ ΟΤΙ FX-DS110-APL GN-1010Precautions Related to Service Configuration List Before Using ProductProduct Configuration CD-ROMFeatures IntroductionTable of Contents Functions of the Utility Software TroubleshootingAppendix Component Locations OverviewLED WRX LED IndicatorsPower LinkDIP Switch Default Setting Factory Setting DIP SwitchesFunction of DIP Switch Multi-channel Operation AP2Access Point AP Operating ModeInfrastructure Wi-Fi Mode Station STPage Connection with Cross Cable Using the Utility SoftwareConnecting between the GN-1010 and PC Connection with HubPreparing the Utility Software Node Registration Enter the access point name and click OK Click Exit to complete the detectionConfiguration Click Read to load the setting of the device Click OK Click the appropriate tab and edit the parametersFunctions of the Utility SOFT- Ware Main Menu ScreenNected to the same network group Configuration Screen Base ESS ID ANY IDWSL WirelessWEP Classifi Parameter Default Description Extended Roaming AP2Extension Speed Control RssiFilter MACMAC Address Filter MAC Address Filter List File LogflistProtocol Filter Protocol Filter List File PrtflistGN-1010 User’s Manual Functions of the Utility Software Registered information is displayed on the MAC Address List GN-1010 User’s Manual Functions of the Utility Software Registered information is displayed on the Protocol List Snmp Spanning TreeFile Management Status Common ItemsEnvironment Interfaces MTUParameter Description Wireless Node RssiBridge Information of this tab is excluded from support Wireless Counter Check Peripheral Environment or Installation Location TroubleshootingWhen Communication Fails Check SoftwareWhen Device Does Not Start Check Power LEDPhysical Specifications Product SpecificationsExternal Dimensions AppendixSoftware Specification Input/Output InterfaceGlossary Bridge Spectrum Diffusion TransmissionChannel RouterPage Page Page GN-1010 Kanda NISHIKI-CHO, CHIYODA-KU, TOKYO, 101-8442, Japan