Toshiba GN-1010 manual Wireless, Wsl, Wep

Wireless

This tab sets the wireless parameters for the device.

<Entry Item>

Classifi-	Parameter	Default	Description
cation		Value
	WSL Scram-	Disabled
WSL	ble		This function is not supported.
(Original)
	WSL Scram-	0 to all
	ble Key
	WEP	Disabled	Determines whether or not the WEP funciton is used.
	Default Tx	Setting is	Selects the WEP key number to use for data transmission.
	Key	not allowed.	• 1 to 4
		(1)
WEP	Key 1	Setting is	Sets the WEP key for WEP encryption.
		not allowed.	• Hexadecimal value (0 to 9, A to F)
		(A1B2C3D4	* To perform communications using the WEP function, the
		E5	key placed in the default send key number used for trans-
		40 bits)	mission must be the same as that placed in the same
			location on the receiver.
	Key 2 to 4	Disabled
	Extended	Disabled	Sets the AP roaming method.
	Roaming		• Enabled/Disabled
	(*1)		* When enabled, "AP Login Priority" setting is allowed.
Exten-	Roaming	Setting is	Selects the threshold value to initiate roaming.
	Threshold	not allowed.	• 50 to 150
sion
	(*2)	(80)	* Roaming is performed when the average RSSI value dur-
Control
			ing the RSSI sampling time is less than this value.
	RSSI Sam-	Setting is	Selects the sampling time (sec.) to obtain the RSSI value to
	pling	not allowed.	initiate roaming.
	Time (*2)	(3 sec.)	• 1 to 10

GN-1010 User’s Manual — Functions of the Utility Software 29