
— Extension Speed Control
“Extension Speed Control” is the function which automatically changes the trans- mission speed according to the RSSI value.
This lowers the speed when the RSSI value becomes low, and heighten the speed when the RSSI value becomes high.
When using the
RSSI 70
RSSI 80
RSSI 90
11Mbps | 5.5Mbps | 2Mbps | 1Mbps |
ST
Transit Transit Transit
AP
1 | 2 | 3 | 4 |
•There is a station logged in to AP at 1, with the transmission speed 11Mbps. RSSI value is retained at 90 or more.
•When the station transfers to 2 (RSSI 90 or below and RSSI 80 or more), “Extension Speed Control“ function will be activated and the transmission speed will be changed to 5.5Mbps.
•When it transfers to 3 or 4, the speed will be changed to 2Mbps or 1Mbps respectively.
32 |