Toshiba 1000 Series manual Operating Precautions

Page 21

Operating Precautions

CAUTION

1.The UPS should not be powered up until the entire operation manual has been read.

2.The voltage of the input power source must be within the range of +10% to -30% of the rated input voltage. The input frequency must be within the rated input frequency range. Voltages and frequencies outside of the permissible range may activate the internal protection devices.

3.The UPS should not be used with a load that has a rated input that is greater than the rated output of the UPS.

4.Do not use the UPS to provide power to motors that require high starting current or with motors that require a long starting time, such as vacuum cleaners and machine tools (over sizing the UPS for lock rotor current would be required).

5.Do not insert metal objects or combustible materials in the ventilation slots of the UPS.

6.Do not place, hang, or paste any objects on the exterior surfaces of the UPS.

7.The capacitors of the UPS maintain a residual charge for a while after turning the UPS off. The required discharge time for each UPS typeform is provided via a cabinet label and a CHARGE LED. Wait for at least the minimum time indicated on the label and ensure that the CHARGE LED has gone out before opening the door of the UPS once the UPS power has been turned off.

8.Do not attempt to disassemble, modify, or repair the UPS. Call your Toshiba sales representative for repair information.

9.Turn the power on only after attaching ALL of the covers.

10.Do Not remove any covers of the UPS when the power is on.

11.If the UPS should emit smoke or an unusual odor or sound, turn the power off immediately.

12.The heat sink and other components may become extremely hot to the touch.

XX

Image 21

Contents Page Important Notice Uninterruptible Power Supply Table of Contents Manual’s Purpose and Scope Page EMC Statements FCC PartICES-003 Declaration of Conformity Request Safety Alert Symbol / Signal Words General Safety InstructionsPage Special Symbols Important Safety Instructions Qualified Personnel onlyQualified Personnel shall XII Important Safety Instructions contd XIV LA Sécurité Conserver CES Instructions Instructions Importantes ConcernantInspection/Storage/Disposal Disposal Storage MaintenanceInstallation Precautions Conductor Routing and Grounding Operating Precautions XXI System Description IntroductionGeneral Description Block diagramPage Diagnostic Tests Free Run ModeSystem Configuration Storage Environment InstallationVertical and Wall-mounted Installations with Accessories Rack-mounted Installation with Accessories Stacked UPS Installation with accessories Rear Panel Views 1000VA 1200VA Tower Rear Panel 1000VA Rack mount 1U Rear Panel 1000VA Rack mount 2U Rear Panel Connection to main supply and loads 1000 1200 VA Example of Installation of Plug & Play products Settings Options Default Remarks Front Panel SettingsBattery Test TEST? RS-232 Standard Interface Port Computer and Alarm ConnectionsUSB Port EPO Port emergency power offNetwork Transient Protector Load SegmentsUPS Startup and Shutdown Starting the UPS User’s Guide to OperationsShutting Down the UPS Button OperationON-LINE Control Panel functionsNormal Display UPS Meters DisplayLCD Message Description UPS Configurations Silencing an Alarm Audible AlarmsUPS Manual Test Interpreting UPS MessagesTroubleshooting Maintenance Power Range 1000-1200 VA LV General Technical SpecificationsInput OutputEnvironmental Power Range1000 VA 19 Rack-mount model, LV, 1U & 2U GeneralPower Range 1000-1200 VA HV General Standard Power Range 1000 VA 19 Rack-mount model, HV, 1U & 2U GeneralRack-mount HV Model Tower HV ModelRack-mount LV Model Tower LV ModelUninterruptible Power SUPPLIES-UPS Warranty InformationLimitations and Exclusions Page Respective warranty period will warranty work be performed Procedure for Defective Product Screening and DispositionModifications