Toshiba 1000 Series Power Range1000 VA 19 Rack-mount model, LV, 1U & 2U General, Environmental

Page 50

7.3 Power Range:1000 VA (19” Rack-mount model, LV, 1U & 2U)

General

 

Rated power:

1000 VA at power factor 0.7

Technology:

On-line, double conversion topology with automatic

 

bypass

Input

 

Phase:

Single phase with ground

Bypass Voltage:

96VAC- 138VAC (user selectable)

Input Voltage range:

80VAC- 144VAC

Frequency:

50/60 Hz Auto selection

Frequency window from main supply: 45-65 Hz

Synchronization window:

± 3Hz

Input current:

1000 VA 8.2A

Input Power factor:

0.97

Output

 

Output Voltage:

100/110/115/120/127 VAC, selectable from LCD panel

Voltage regulation:

± 2%

Voltage distortion:

< 5% THD at full non-linear load, < 3% THD at full

linear load:

 

Frequency regulation:

± 0.25 Hz (battery or free running mode)

Dynamic response:

± 9 % max from 100% to 20 % or from 20% to 100 %

linear load:

 

Overload capacity:

100-125% 1 min, 125-150% 10 sec

Efficiency:

greater than 86%

Environmental

 

Ambient temperature:

+0 °C to +40 °C

Recommended temperature:

+15 °C to +25 °C

Storage temperature:

-15 °C to +50 °C

Cooling:

Forced air-cooling

Humidity:

0-95%, non-condensing

Audible noise:

< 45 db normal and battery mode (1000 ~1200 VA)

28

Image 50
Contents Page Important Notice Uninterruptible Power Supply Table of Contents Manual’s Purpose and Scope Page ICES-003 EMC StatementsFCC Part Declaration of Conformity Request General Safety Instructions Safety Alert Symbol / Signal WordsPage Special Symbols Qualified Personnel shall Important Safety InstructionsQualified Personnel only XII Important Safety Instructions contd XIV Instructions Importantes Concernant LA Sécurité Conserver CES InstructionsInspection/Storage/Disposal Storage Maintenance DisposalInstallation Precautions Conductor Routing and Grounding Operating Precautions XXI Introduction System DescriptionBlock diagram General DescriptionPage Free Run Mode Diagnostic TestsSystem Configuration Storage Installation EnvironmentVertical and Wall-mounted Installations with Accessories Rack-mounted Installation with Accessories Stacked UPS Installation with accessories Rear Panel Views 1000VA 1200VA Tower Rear Panel 1000VA Rack mount 1U Rear Panel 1000VA Rack mount 2U Rear Panel Connection to main supply and loads 1000 1200 VA Example of Installation of Plug & Play products Front Panel Settings Settings Options Default RemarksBattery Test TEST? Computer and Alarm Connections RS-232 Standard Interface PortNetwork Transient Protector EPO Port emergency power offUSB Port Load SegmentsShutting Down the UPS User’s Guide to OperationsUPS Startup and Shutdown Starting the UPS Button OperationControl Panel functions ON-LINELCD Message Description Normal DisplayUPS Meters Display UPS Configurations UPS Manual Test Audible AlarmsSilencing an Alarm Interpreting UPS MessagesTroubleshooting Maintenance Input Technical SpecificationsPower Range 1000-1200 VA LV General OutputPower Range1000 VA 19 Rack-mount model, LV, 1U & 2U General EnvironmentalPower Range 1000-1200 VA HV General Power Range 1000 VA 19 Rack-mount model, HV, 1U & 2U General StandardTower HV Model Rack-mount HV ModelTower LV Model Rack-mount LV ModelWarranty Information Uninterruptible Power SUPPLIES-UPSLimitations and Exclusions Page Procedure for Defective Product Screening and Disposition Respective warranty period will warranty work be performedModifications