Siemens Server manual Switched connection via modem, Analog modem Isdn modem

Page 16

Setting the IP address of the ChemWeb Server

A fixed IP address and network mask must always be assigned. Other settings should not be changed.

Confirm and store by clicking “OK” twice.

With some Windows configurations, a restart may now be necessary.

Special features of the direct network connection with Windows 95 / 98 / ME

With these Windows versions, a network connection is set up automatically if a network board is identified in the laptop computer/PC. It is, however, possible that the wrong network protocol is installed in the network settings! The “TCP/IP” protocol must be installed in the network settings! All other protocols and network components can be deleted except for the network board.

Switched connection via modem

To set up a connection to the ChemWeb Server via the integrated modem, the following data are required:

-modem type (analog / ISDN)

-telephone number of the ChemWeb Server

-PPP-IP address

-access code (login / password)

Take into account that, with one modem, data connections can only be established to certain other types of modems:

 

Analog modem

ISDN modem

Analog modem

￿

r

ISDN modem

r

￿

As an example, the setup of a switched connection using a WindowsXP system is shown below. With other Windows versions, the procedure is similar (possibly the remote data transmission network must be reinstalled). See your IT Department if needed. The modem or the ISDN card must have already been installed correctly. To set up the connection, the menu item “Create a new connection” in the left window under “Control Panel” ==> “Network and Internet Connections” ==> “Network Connections” must be selected.

10

Image 16
Contents ChemWeb Server Page Table of Contents Software and Firmware License Disconnect and Lockout Power Before Servicing Page Overview of ChemWeb Server Power Supply Description of ChemWeb ServerInputs IN1, IN2 Ext. ResetCOM 0 W&T RS485 bus W&T RS232 COM 1 RS232 null modem Ethernet / 10BaseT RJ45Telephone line only for analog or Isdn version OutputsCompactFlash slot CF LED displaysInstallation of RS485 bus Connecting more than one ChemWeb ServerRS485 bus system 390 Ohm +/- 2 % Network connection in a LAN Setting the IP address of the ChemWeb ServerDirect network connection Setting the IP address of the ChemWeb Server Switched connection via modem Analog modem Isdn modemSetting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Null modem connection via serial interface Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server without Dhcp Setting the IP address of the ChemWeb Server with Dhcp Connection via InternetBasic settings via a Browser StartupISP configuration Server SetupBus scan Mail configuration Event configuration Time/date setting Server commandsChange passwords Name configuration Chip info Operation and Data Access Display and configuration windowOperation via Web Browser Navigation windowOperation and Data Access 03 04 a 00.TXT Log filesData access via FTP Backing up log filesData access to CompactFlash card with card scanner Data access via Web BrowserTechnical data Appendix Tested Web Browser Appendix Appendix Page Siemens All Rights Reserved