Siemens Server manual Mail configuration

Page 31

Server Setup

Mail configuration

Under this menu item, the ChemWeb Server is supplied with data from your provider for sending e- mails. Type the data you received from your provider and the receiver e-mail addresses in the corresponding boxes, and confirm the entry by clicking “Send”.

Mail Server:

These entry boxes contain the data required to log on to the e-mail server of your provider and to send e-mails.

Destination (to):

In these entry boxes you define to which receivers information e-mails are to be sent.

Actions:

Under “Information mail” you can select if an information e-mail is to be sent daily and at which time. If the connection setup fails, the ChemWeb Server tries twice every 5 minutes, up to one hour, to establish the connection. In this e-mail, the currently valid IP address under which the ChemWeb Server can be reached in the Internet is also notified.

By clicking “Event mail”, you select to send alarm states defined under “Event Configuration” as e-mail.

Under “Duration” you determine the minimum time the ChemWeb Server is to remain online with the Internet. The setting “0” signifies an online time of minimum 3 minutes.

Any access to the ChemWeb Server (also via the internal network), extends this time correspondingly! Even if the ChemWeb Server is not accessed directly by a browser or an FTP program, the real online time can be extended extremely by port scans, ICMP inquiries or other network traffic, and thus increase the connection costs considerably!

25

Image 31
Contents ChemWeb Server Page Table of Contents Software and Firmware License Disconnect and Lockout Power Before Servicing Page Overview of ChemWeb Server Description of ChemWeb Server Power SupplyInputs IN1, IN2 Ext. ResetCOM 0 W&T RS485 bus W&T RS232 Outputs COM 1 RS232 null modemEthernet / 10BaseT RJ45 Telephone line only for analog or Isdn versionLED displays CompactFlash slot CFInstallation of RS485 bus Connecting more than one ChemWeb ServerRS485 bus system 390 Ohm +/- 2 % Network connection in a LAN Setting the IP address of the ChemWeb ServerDirect network connection Setting the IP address of the ChemWeb Server Analog modem Isdn modem Switched connection via modemSetting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Null modem connection via serial interface Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server Setting the IP address of the ChemWeb Server without Dhcp Connection via Internet Setting the IP address of the ChemWeb Server with DhcpStartup Basic settings via a BrowserISP configuration Server SetupBus scan Mail configuration Event configuration Server commands Time/date settingChange passwords Name configuration Chip info Navigation window Operation and Data AccessDisplay and configuration window Operation via Web BrowserOperation and Data Access Log files 03 04 a 00.TXTBacking up log files Data access via FTPData access via Web Browser Data access to CompactFlash card with card scannerTechnical data Appendix Tested Web Browser Appendix Appendix Page Siemens All Rights Reserved