Toshiba e Studio45/35 manual Parallel port, IPX Novell

Page 16

xiv Introduction

To use TopAccess, you also need:

•Netscape Communicator v4.5 or later, with Java enabled, or Internet Explorer v4.0.1 or later, with Java enabled

NOTE: Netscape continues to release frequent updates to its browser. As support cannot be guaranteed for all versions, use the version speciﬁed above for best results.

•A monitor and video memory that supports 16-bit color at a minimum resolution of 800 x 600

•A TCP/IP enabled network and the IP address or DNS name of the GA-1040

•Web Services enabled on the GA-1040

Parallel port

To print to the GA-1040 using the parallel port, you need:

•A Windows computer with an 80486, AMD, or Pentium processor

•At least 24MB of RAM for Windows 95/98

•At least 32MB of RAM for Windows Me

•At least 32MB of RAM for Windows NT 4.0

•At least 64MB of RAM for Windows 2000

IPX (Novell)

To use the GA-1040 with an IPX (Novell) network, you need:

•A Novell server

•Novell NetWare software version 3.x, 4.x, or 5.x

•Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, or Ethernet 802.2

Image 16

Contents Operators Manual Page Toshiba GA-1040 Page Legal Notices Avis de Conformation Classe a de l’Industrie Canada Proprietary Rights General Contents Setting Up TopAccess Conventions IntroductionAbout the documentation Speciﬁcations User software Full set of user software is supported for the GA-1040System requirements WindowsMac OS Parallel port IPX NovellCommand WorkStation option DocBuilder Pro optionPage Installing User Software on a Windows Computer Windows 95/98/ME Choose Properties from the File menuClick OK Using Two-Way Communication This will activate the Printer IP Address or DNS Name ﬁeldCompleting the Windows 95/98/Me printer connection For instructions, see the Conﬁguration GuideTo Prepare the Printer for Parallel Port Printing System Properties window appears Click the General tab Click Print Test Page and click OKUpdate Device Driver Wizard appears Some ﬁles are copied To SET UP IPX/SPX Printing Page List of connection options is displayed Setting up SMB printing with Windows 95/98/Me To SET UP SMB Printing on Windows 95/98/ME Add Printer Wizard appears Path is copied to the Install From Disk dialog box Page Insert the User Software CD into the CD ROM drive Click OK Installing User Software on a Windows Computer Using Two-Way Communication To do this See Completing the Windows NT 4.0 TCP/IP and LPR connection Available port types are displayed Click Close in the Printer Ports dialog box IP address will automatically be entered for the Port Name Device will automatically be detectedConﬁgure Standard TCP/IP Port Monitor dialog box appears List of NetWare servers is displayed Printer Job Notes window appears Setting up SMB printing with Windows NT 4.0 and/or Add Printer Wizard appears Click Open Setting up IPP printing with Windows Necessary ﬁles are installed to your hard driveTo SET UP IPP Printing with Windows Installing GA-1040 software Fiery LinkTo Install Fiery Link Name of dialog box Action When ﬁnished Insert the Command WorkStation CD Using the software for the ﬁrst time Conﬁguring a connection for Fiery LinkGA-1040 appears in the My Fiery List Click Apply to accept the changes to My Fiery List Click OK Page Click the AutoSearch tab Click the Advanced button Click Search Click Apply to accept the changes to My Fiery List Click OK Installing User Software on a Windows Computer Page Installing User Software on a Windows Computer Click Search Conﬁguring the connection for the Command WorkStation Device Name of the GA-1040 GA-1040 Copying the printer description ﬁles for Windows Modifying the conﬁgurationPage Installing Mac OS software Setting up the GA-1040 as a PostScript printerInstalling User Software on a Mac OS Computer Setting up the GA-1040 in the Chooser Make sure AppleTalk is set to ActiveClose the Chooser Installing GA-1040 software and fonts Use the table below as a guide when installing softwareSome ﬁles are installed Launch Fiery Link by double-clicking its icon Click Apply to accept the changes to My Fiery List Click OK To Manually Configure the Connection for Fiery Link Page Click the AutoSearch tab Click the Advanced button Click Search Click Apply to accept the changes to My Fiery List Click OK Installing User Software on a Mac OS Computer Page Installing User Software on a Mac OS Computer Click Search Click Apply to accept the changes to My Fiery List Click OK Fonts Setting up TopAccess Make sure Java is enabled in your Internet browser TopAccess main screen appears Using the Installer WebToolFiery WebTools website appears Folder is installed to the location you speciﬁed Printer driver for Page On a Windows computer On a Mac OS computer This folder must be located outside of the System folderIndex Index PPD Kanda NISHIKI-CHO, CHIYODA-KU, TOKYO, 101-8442, Japan