Toshiba e Studio45/35 manual Device Name of the GA-1040 GA-1040

Page 68

50Installing User Software on a Windows Computer

3.Enter the appropriate information for the GA-1040.

Nickname—Enter a name for the GA-1040. This name can be any name you wish; it does not have to match the actual Server Name of the GA-1040.

NOTE: The nickname cannot contain any of the following seven characters: [ ] _ " ' <space> <tab>

Protocol—Choose the type of network protocol you are using from the pop-up menu.

NOTE: Command WorkStation software is supported on Windows 95/98/Me, Windows NT 4.0, and Windows 2000 over TCP/IP only.

Server Name—If you are using the TCP/IP protocol, enter the IP address (or DNS name) of the GA-1040.

New Device—Enter the name of the device the GA-1040 is connected to:GA-1040.

4.When you have entered all the information, click Add.

5.With the device name (GA-1040) selected in the Devices list, click OK.

The GA-1040 appears in the list of available servers. The ﬁrst line of the entry displays the nickname you gave the server, followed by the protocol you chose. The second line displays the device name.

Device Name of the GA-1040 (GA-1040)

6.With the device name (GA-1040) selected in the list of Available servers, click OK to begin using the software.

Image 68

Contents Operators Manual Page Toshiba GA-1040 Page Legal Notices Avis de Conformation Classe a de l’Industrie Canada Proprietary Rights General Contents Setting Up TopAccess About the documentation IntroductionConventions Speciﬁcations User software Full set of user software is supported for the GA-1040System requirements WindowsMac OS Parallel port IPX NovellCommand WorkStation option DocBuilder Pro optionPage Installing User Software on a Windows Computer Windows 95/98/ME Choose Properties from the File menuClick OK Using Two-Way Communication This will activate the Printer IP Address or DNS Name ﬁeldCompleting the Windows 95/98/Me printer connection For instructions, see the Conﬁguration GuideTo Prepare the Printer for Parallel Port Printing System Properties window appears Click the General tab Click Print Test Page and click OKUpdate Device Driver Wizard appears Some ﬁles are copied To SET UP IPX/SPX Printing Page List of connection options is displayed Setting up SMB printing with Windows 95/98/Me To SET UP SMB Printing on Windows 95/98/ME Add Printer Wizard appears Path is copied to the Install From Disk dialog box Page Insert the User Software CD into the CD ROM drive Click OK Installing User Software on a Windows Computer Using Two-Way Communication To do this See Completing the Windows NT 4.0 TCP/IP and LPR connection Available port types are displayed Click Close in the Printer Ports dialog box IP address will automatically be entered for the Port Name Device will automatically be detectedConﬁgure Standard TCP/IP Port Monitor dialog box appears List of NetWare servers is displayed Printer Job Notes window appears Setting up SMB printing with Windows NT 4.0 and/or Add Printer Wizard appears Click Open Setting up IPP printing with Windows Necessary ﬁles are installed to your hard driveTo SET UP IPP Printing with Windows Installing GA-1040 software Fiery LinkTo Install Fiery Link Name of dialog box Action When ﬁnished Insert the Command WorkStation CD Using the software for the ﬁrst time Conﬁguring a connection for Fiery LinkGA-1040 appears in the My Fiery List Click Apply to accept the changes to My Fiery List Click OK Page Click the AutoSearch tab Click the Advanced button Click Search Click Apply to accept the changes to My Fiery List Click OK Installing User Software on a Windows Computer Page Installing User Software on a Windows Computer Click Search Conﬁguring the connection for the Command WorkStation Device Name of the GA-1040 GA-1040 Copying the printer description ﬁles for Windows Modifying the conﬁgurationPage Installing Mac OS software Setting up the GA-1040 as a PostScript printerInstalling User Software on a Mac OS Computer Setting up the GA-1040 in the Chooser Make sure AppleTalk is set to ActiveClose the Chooser Installing GA-1040 software and fonts Use the table below as a guide when installing softwareSome ﬁles are installed Launch Fiery Link by double-clicking its icon Click Apply to accept the changes to My Fiery List Click OK To Manually Configure the Connection for Fiery Link Page Click the AutoSearch tab Click the Advanced button Click Search Click Apply to accept the changes to My Fiery List Click OK Installing User Software on a Mac OS Computer Page Installing User Software on a Mac OS Computer Click Search Click Apply to accept the changes to My Fiery List Click OK Fonts Setting up TopAccess Make sure Java is enabled in your Internet browser Fiery WebTools website appears Using the Installer WebToolTopAccess main screen appears Folder is installed to the location you speciﬁed Printer driver for Page On a Windows computer On a Mac OS computer This folder must be located outside of the System folderIndex Index PPD Kanda NISHIKI-CHO, CHIYODA-KU, TOKYO, 101-8442, Japan