Toshiba BDRV-WBX8-Z31 Version 7.2.4 M-3 manual Parameter Setting on the Printer

Page 100

6.2Parameter Setting on the Printer

For how to set the parameters, please refer to the Owner’s Manual supplied with the connected TOSHIBA bar code printer.

Note: The following example is the parameter setting procedure for the B-SX5T.

The “CENTRO. MODE” is set to “ECP” and “PLUG & PLAY” is set to “ON”, respectively.

Power ON

ONLINE MODE

B-SX5TV1.0A

［PAUSE］

PAUSE

B-SX5TV1.0A

［RESTART］

<1>RESET

［FEED］

<2>PARAMETER SET

［PAUSE］

<2>PARAMETER SET FONT CODE PC-850

［PAUSE］

<2>PARAMETER SET CENTRO.MODE SPP

［PAUSE］

<2>PARAMETER SET PLUG ＆ PLAY OFF

［PAUSE］

<2>PARAMETER SET

［RESTART］

<1>RESET

［PAUSE］

ONLINE MODE

B-SX5TV1.0A

The printer is in idle or printing.

(1) Press the [PAUSE] key.

The printer turns to the pause state.

(2)Hold down the [RESTART] key for 3 seconds or more. The Reset menu is displayed.

(3)Press the [FEED] key.

The Parameter Setting menu is displayed.

(4)Press the [PAUSE] key.

(5)Press the [PAUSE] key until the “CENTRO.MODE SPP” is displayed.

Centronics interface operating mode selection

(6)Select the “ECP” by using the [FEED] or [RESTART] key.

(7)Press the [PAUSE] key.

Plug and Play selection

(8)Select the “ON” by using the [FEED] or [RESTART] key.

(9)Press the [PAUSE] key until the “<2>PARAMETER SET” is displayed.

The Parameter Setting menu is displayed.

(10)Press the [RESTART] key. The Reset menu is displayed.

(11)Press the [PAUSE] key.

The printer returns to the Online mode.

- 98 -

Image 100

Contents Printer Driver Table of Contents Introduction Features Applicable printersScreens Used in This Document NotationTrademark and Copyright Operational Conditions Operation SystemSpecifying a network path for the printer port Configuration for the Status Monitor InterfaceXON/XOFF Page User Page Page How to open the Properties with the administrative privilege How to set up Windows Vista/Server2008/7/Server2008R2 againPage Preparatory Procedure Common to All Models Printer driver installation methodInstallation method by operating systems SX4, B-SX4-CN, B-SX5, and B-SX5-CNPreparation for Installation Page Installation under Windows XP/Server2003 Page List of the installable printer is displayed Page Page To print on the shared printer How to Enable Bi-directional Communication Support Installation under Windows Vista/Server2008/7/Server2008R2 TEC B-SA4G SA4TM-GS12-QM-R TEC EP2DL-GH20-QM-R Page Bi-directional Communication Support How to Enable Bi-directional Communication Support Read before installation Page Installation starts Page Page Page Page Enable Bi-directional Communication Support Page CENTRO. Mode → ECP Plug & PLAY→ on Page Page SX4, B-SX4-CN, B-SX5, and B-SX5-CN Communication Support Page Uninstalling the printer driver Uninstalling the Printer DriverCase of deleting the printer drivers except for V7.2.4 M-3 Page Page To delete the V6.5 Build75 or V6.5 Build77 „ Property setting menus in the Printing Preferences Function Description SupportFunction Description Support Function Description Support „ Property setting menus in the Properties Font Tools Printer fontFunction Description Support Reference Setup Tab „ Stock„ Orientation Name„ Preset „ EffectsMirror Image Negative„ Label Size „ Automatic Preset Selection„ Exposed liner width „ Preset Management UpdateNew Delete„ User Commands tab Default Orientation„ Printing Position Horizontal OffsetEnable Substitution Default Copies„ Driver Option tab Function CharacterDisable Copies Limit Disable User-Defined Paper Size„ Resolution Graphics Tab„ Dithering „ Color ControlStock Tab „ Media SettingsPrint Method „ Issue Settings Issue ModeSensor Label Gap„ Fine Adjustment „ Print Density Adjustment „ Feed AdjustmentTransfer Mode Options Tab„ Ribbon Adjustments „ Multiple Part Print Area Settings„ Supply Options „ Multiple Part Print AreaMultiple Part Print Area High Density Adjustment Multiple Part High Density Print Area„ Ribbon Motor Voltage Adjustment „ Ribbon TypeType Rewind MotorFonts Tab „ FontNew Bar Code Font Edit„ View Scalable Font Settings„ Tools Bitmap Font Settings Compatibility SettingsUtility Font Settings List Bar Code and Rfid Fonts When this‹ Encoding tab Text EncodingsFont Name EncodingJoin Multiple Lines Width„ Symbology Specific Options „ Bar Code OptionsTools Tab „ PrinterReset Printer Send Printer CommandManage XML Data Print Files Test Print HeadCommand Protocol Configure MemoryRibbon Settings Administration tab„ Driver Format MemoryRegional Options tab Network Settings tabLanguage Selection Logging tab Printer Specifications tabPrinter Code Recording tab Status tab Status Display OptionsJob Verification tab Communication tabDesignation of Printer Font „ Example of selecting a font on the application„ Example of bar code font programming Visual Basic 5.0/6.0 Character font Bar code font„ Restrictions of Bar Code Fonts Control code Input data 203dpi 600dpi Specified size Print size System Configuration System Configuration Example PC #1 PC #2 Printer server Centronics Addition/Deletion of Standard TCP/IP Port Addition Page Page Deletion How to Enable Bi-directional Communication Support AppendixParameter Setting on the Printer How to Connect the Printer to LAN „ Printer Port Types