Toshiba BDRV-WBX8-Z31 Version 7.2.4 M-3 manual PC #1 PC #2 Printer server Centronics

Page 93

„Example 3 In the case print jobs are sent from Windows PC #2 (Windows 9x) and Windows PC #3 (Windows NT) to the Windows PC #1 (Windows NT) via TCP/IP, and these print jobs are sent from the PC #1 to multiple printers

1.Install the printer drivers (for Windows NT) in the PC #1 for the number of printers connected.

2.Right-click the printer icon on the PC#1, open the Properties and add the LPR port specifying the printer server address.

3.In the Properties screen, specify the printer on the network as the shared printers.

4.Install the printer driver (for Windows 9X) in the PC #2.

5.Specify the network path of the printer connected to the PC # 1 and install it as a network printer.

6.Install the printer driver (for Windows NT) in the PC #3.

7.Specify the network path of the printer connected to the PC #1 and install it as a network printer.

TCP/IP

PC #2

PC #1

PC #3

 

Printer

 

 

server

 

 

 

Print data flow:

Printer server

 

 

 

 

 

Centronics

Centronics

 

 

 

 

 

Printer

Printer

„Example 4 In the case print jobs are sent from Windows PC #1 (Windows 9x) and

Windows PC #2 (Windows NT) to the multiple printers via TCP/IP

1.Install the printer drivers (for Windows 9X) in the PC #1 for the number of printers connected.

2.Add the LPR port specifying the printer server address. (Use other software like the printer server specific setting utility to add the LPR port.)

3.Specify the LPR Port added in Step 2 above as the print port of the PC #1.

4.Install the printer drivers (for Windows NT) in the PC #2 for the number of printers connected.

5.Right-click the printer icon on the PC #2, open the Properties, and add the LPR port specifying the printer server address.

6.Specify the LPR Port added in Step 5 above as the print port of the PC #2.

Print data flow:

TCP/IP

PC #1

PC #2

Printer server

Printer server

Centronics

Centronics

Printer

Printer

- 91 -

Image 93
Contents Printer Driver Table of Contents Introduction Applicable printers FeaturesNotation Screens Used in This DocumentTrademark and Copyright Operation System Operational ConditionsSpecifying a network path for the printer port Interface Configuration for the Status MonitorXON/XOFF Page User Page Page How to set up Windows Vista/Server2008/7/Server2008R2 again How to open the Properties with the administrative privilegePage Printer driver installation method Preparatory Procedure Common to All ModelsSX4, B-SX4-CN, B-SX5, and B-SX5-CN Installation method by operating systemsPreparation for Installation Page Installation under Windows XP/Server2003 Page List of the installable printer is displayed Page Page To print on the shared printer How to Enable Bi-directional Communication Support Installation under Windows Vista/Server2008/7/Server2008R2 TEC B-SA4G SA4TM-GS12-QM-R TEC EP2DL-GH20-QM-R Page Bi-directional Communication Support How to Enable Bi-directional Communication Support Read before installation Page Installation starts Page Page Page Page Enable Bi-directional Communication Support Page CENTRO. Mode → ECP Plug & PLAY→ on Page Page SX4, B-SX4-CN, B-SX5, and B-SX5-CN Communication Support Page Uninstalling the Printer Driver Uninstalling the printer driverCase of deleting the printer drivers except for V7.2.4 M-3 Page Page To delete the V6.5 Build75 or V6.5 Build77 Function Description Support „ Property setting menus in the Printing PreferencesFunction Description Support Function Description Support Font Tools Printer font „ Property setting menus in the PropertiesFunction Description Support Reference „ Stock Setup Tab„ Orientation Name„ Effects „ PresetMirror Image Negative„ Automatic Preset Selection „ Label Size„ Exposed liner width Update „ Preset ManagementNew DeleteDefault Orientation „ User Commands tab„ Printing Position Horizontal OffsetDefault Copies Enable Substitution„ Driver Option tab Function CharacterDisable User-Defined Paper Size Disable Copies LimitGraphics Tab „ Resolution„ Dithering „ Color Control„ Media Settings Stock TabPrint Method Issue Mode „ Issue SettingsSensor Label Gap„ Fine Adjustment „ Feed Adjustment „ Print Density AdjustmentTransfer Mode Options Tab„ Multiple Part Print Area Settings „ Ribbon Adjustments„ Supply Options „ Multiple Part Print AreaMultiple Part High Density Print Area Multiple Part Print Area High Density Adjustment„ Ribbon Type „ Ribbon Motor Voltage AdjustmentType Rewind Motor„ Font Fonts TabNew Bar Code Font EditScalable Font Settings „ View„ Tools Compatibility Settings Bitmap Font SettingsUtility Font Settings List Bar Code and Rfid Fonts When thisText Encodings ‹ Encoding tabEncoding Font NameJoin Multiple Lines Width„ Bar Code Options „ Symbology Specific Options„ Printer Tools TabSend Printer Command Reset PrinterManage XML Data Print Files Test Print HeadConfigure Memory Command ProtocolAdministration tab Ribbon Settings„ Driver Format MemoryNetwork Settings tab Regional Options tabLanguage Selection Printer Specifications tab Logging tabPrinter Code Recording tab Status Display Options Status tabCommunication tab Job Verification tab„ Example of selecting a font on the application Designation of Printer Font„ Example of bar code font programming Visual Basic 5.0/6.0 Character font Bar code font„ Restrictions of Bar Code Fonts Control code Input data 203dpi 600dpi Specified size Print size System Configuration System Configuration Example PC #1 PC #2 Printer server Centronics Addition/Deletion of Standard TCP/IP Port Addition Page Page Deletion Appendix How to Enable Bi-directional Communication SupportParameter Setting on the Printer „ Printer Port Types How to Connect the Printer to LAN