Toshiba BDRV-WBX8-Z31 Version 7.2.4 M-3 manual Options Tab, „ Graphic Options, „ Feed Adjustment

3.4 Options Tab

Models other than B-EP2DL-G and B-EP4DL-G B-EP2DL-G and B-EP4DL-G

„Graphic Options

•Transfer Mode

Allows selecting the method used to download graphics to the printer. Basically, select the “TOPIX compression” mode.

For the models which are not supporting the TOPIX compression mode, select “Uncompressed 8-bit (overwrite)”.

The “TOPIX compression (XOR)” method improves the throughput by processing only a different part from the previous page. Choose this option when you print a fixed format partly including variable data. However, the throughput may not improve depending on the image to be printed.

Printer models supporting the TOPIX compression mode

•B-372 ROM version V2.4 or later

•B-472 ROM version V2.4 or later

•B-872 ROM version V1.3 or later

•The all versions of the other models than above.

„Print Density Adjustment

When the “Set” checkbox is checked, you can set the print density (print head voltage) for each of the Direct thermal and Thermal transfer.

When not checked, the printer operates according to its current setting.

For the B-EP2DL-G and B-EP4DL-G, the “Head Output Division” feature is provided, which enables properly changing the print quality and print speed depending on the selected print head control. When the Set” checkbox is not checked, the printer operates according to its current setting.

„Feed Adjustment

When the “Set” checkbox is checked, you can set the length of the label the printer automatically feeds after printing. Before printing the next label, the printer will automatically feed the label in the reverse direction to the print start position.

When not checked, the printer operates according to its current setting.

This feature is not available to the B-419, B-SP2D, B-EP2DL-G, and B-EP4DL-G.

-67 -