w w w . d e l l . c o m s u p p o r t . d e l l . c o m
Viewing Settings
1Turn on (or restart) your computer.
2When the blue DELL™ logo appears, press <F2> immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then shut down your computer and try again.
System Setup Screens
The system setup program screens display the current configuration information for your computer. Information on the screen is divided into five areas:
•Title — The box at the top of all screens that lists the computer name.
•Computer data — Two boxes below the title box that display your computer processor, L2 cache, service tag, and the version number of the BIOS.
•Options — A scrollable box listing options that define the configuration of your computer, including installed hardware, power conservation, and security features.
Fields to the right of the option titles contain settings or values. The fields that you can change appear bright on the screen. The fields that you cannot change (because they are set by the computer) appear less bright. When <Enter> appears to the right of an option title, press <Enter> to access a popup menu of additional options.
•Key functions — A line of boxes across the bottom of all screens that lists keys and their functions within system setup.
•Help — Press <F1> for information on the option that is selected (highlighted).
Clearing Forgotten Passwords
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
If you forget your user or setup password, you cannot operate your computer or change settings in the system setup program until you clear the forgotten password(s).
NOTICE: This process erases both the system and setup passwords.
1Shut down the computer (see page 21).
NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
2Turn off any attached devices and disconnect them from their electrical outlets.
3Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.
4Remove the computer stand (see page 13).
5Open the computer cover (see page 58).
78