NETGEAR WAG102NA manual Hardware Description, Front Panel LED Indicators

ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)

Hardware Description

This section describes the front and rear hardware functions of the WAG102.

Front Panel

The WAG102 front hardware functions are described below.

1	2	3	4	6
			5

Figure 1-1

The following table explains the LED indicators:

Table 1-1. Front Panel LED Indicators

Item	LED		DESCRIPTION
1	PWR		Power Indicator
		Off	No power.
		On	Power is on.
2	TEST		Self Test Indicator
		Blink	Indicates self test, loading software, or system fault (if continues).
			Note: This LED may blink for a minute before going off.
3	100 LINK ACT		100 Mbps Fast Ethernet LAN Activity Indicator
		Off	Indicates no 100 Mbps Fast Ethernet link detected
		Solid On	100 Mbps Fast Ethernet link detected, no activity.
		Blink	Indicates data traffic on the 100 Mbps Fast Ethernet LAN.

Introduction 1-7

v2.0, September 2006