NETGEAR WAG102NA manual Configuring WPA-PSK

ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)

4.Select Security Profile Settings under Security on the main menu, When the screen displays, check the radio button of the security profile you are modifying and click Edit.

5.From the Network Authentication drop-down menu, select WPA & WPA2 with RADIUS from the list. By default, Data Encryption will be set to TKIP+AES.

6.Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations.

7.Click Apply to save your settings.

Configuring WPA-PSK

Not all wireless adapters support WPA. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 or above include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.

Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings.

Figure 2-19

2-34 Basic Installation and Configuration

v2.0, September 2006