ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
Table A-1. Access Point Default Configuration Settings
Feature | Description | |
|
|
|
| DHCP Client | Disabled |
|
|
|
| Time Zone | GMT |
|
|
|
| Time Zone Adjusted for Daylight Saving | Disabled |
| Time |
|
| SNMP | Disabled |
|
|
|
Wireless |
| |
|
|
|
| Operating Mode | Access Point |
| Access Point Name | netgearxxxxxx where xxxxxx are the last 6 digits of the |
|
| wireless access point MAC address. |
| Wireless Communication | Enabled |
|
|
|
| 11a Wireless Network Name (SSID) | NETGEAR_11a |
|
|
|
| 11 b/g Wireless Network Name (SSID) | NETGEAR_11b/g |
|
|
|
| Broadcast Network Name SSID | Enabled |
|
|
|
| Security | Disabled |
|
|
|
| Transmission Speed | Autoa |
|
|
|
| Country/Region | United States (in North America; otherwise, varies by |
|
| region) |
| 80211.a Radio Frequency Channel | Auto |
|
|
|
| 80211.g Radio Frequency Channel | Auto |
|
|
|
| VLAN(802.1Q) | Disabled |
| Output Power | Full |
| Wireless Card Access List | All wireless stations allowed |
| WMM Support | Disabled |
| SuperA Mode and SuperG Mode | Disabled |
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
Default Settings and Technical Specifications |