NETGEAR JNR1010 manual Internet Port

Page 55

N150 4-Port Wireless Router JNR1010

Internet Port

The Internet port section provides the following information:

•MAC Address. The Media Access Control address, which is the unique physical address used by the Internet (WAN) port of the router.

•IP Address. The IP address used by the Internet (WAN) port of the router. If no address is shown or the address is 0.0.0, the router cannot connect to the Internet.

•Connection. This shows if the router is using a fixed IP address on the WAN. If the value is DHCP Client, the router obtains an IP address dynamically from the ISP.

•IP Subnet Mask. The IP subnet mask used by the Internet (WAN) port of the router.

•Domain Name Server. The Domain Name Server addresses used by the router. A Domain Name Server translates human-language URLs such as www.netgear.com into IP addresses.

•Show Statistics button. Click the Show Statistics button to display the following screen:

The Show Statistics screen provides the following information:

•System Up Time. The time elapsed since the router was last restarted.

•Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the screen displays the following information:

•Status. The link status of the port.

•TxPkts. The number of packets transmitted on this port since reset or manual clear.

•RxPkts. The number of packets received on this port since reset or manual clear.

•Collisions. The number of collisions on this port since reset or manual clear.

•Tx B/s. The current transmission (outbound) bandwidth used on the WAN and LAN ports.

•Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN ports.

•Up Time. The time elapsed since this port acquired the link.

•Poll Interval. The interval at which the statistics are updated in this screen. To change the polling frequency, enter a time in seconds in the Poll Interval field, and click Set Interval. To stop the polling entirely, click Stop.

Administration

55

Image 55

Contents N150 4-Port Wireless Router JNR1010 Trademarks Technical SupportStatement of Conditions Contents Security Appendix B Notification of Compliance Index Getting to know your router Hardware SetupPosition Your Router Unpack Your RouterFront Panel Hardware FeaturesLED Side PanelLabel Back PanelGetting Started with Netgear genie Connecting to the routerGather ISP Information Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for DhcpNetgear genie Setup Types of Logins To use Netgear genie to set up your router  To troubleshoot Internet access problems Use Netgear genie After InstallationRouter Dashboard Basic Home Screen Upgrade Router Firmware To use WPS to join the wireless network Join Your Wireless NetworkWPS Method Manual Method Netgear genie App and Mobile genie App To connect manually N150 4-Port Wireless Router JNR1010 Your Internet connection and network Genie Basic SettingsInternet Setup Does Your ISP Require a Login? Answer either yes or no Internet Setup Screen FieldsAttached Devices Parental Controls  To set up Live Parental ControlsN150 4-Port Wireless Router JNR1010 Click the Take me to the status screen button Basic Wireless Settings To view or change basic wireless settings Wireless Settings Screen Fields To change WPA Security Option and Passphrase ModeGuest Networks  To set up a guest networkFastLane Guest Network Wireless Security Options To set up the FastLane feature Genie Advanced Home Specifying custom settings To use the setup wizard again Setup WizardSelect Setup Wizard  To use the WPS Wizard Select Advanced WPS Wizard WPS WizardWAN Setup Setup MenuDefault DMZ Server Change the MTU Size  To set up a default DMZ server To change the MTU size Select Advanced Setup WAN Setup LAN SetupLAN IP address  To change the LAN settings LAN Setup Screen SettingsLAN TCP/IP Setup Use the Router as a Dhcp Server  To reserve an IP address Address ReservationEnable WMM QoS for Wireless Multimedia Applications Quality of Service QoS Setup To create a QoS policy for applications and online games Set Up QoS for Applications and Online GamingClick the Add Priority Rule button Set up QoS for a Router LAN PortClick Add Priority Rule Set up QoS for a MAC Address To edit or delete a QoS policy Edit or Delete an Existing QoS PolicySecurity Keeping unwanted content out of your network To delete a keyword or domain Keyword Blocking of Http Traffic To specify a trusted computer  To block services Block Services Port FilteringUser Defined  To schedule blocking Schedule BlockingSecurity Event Email Notifications  To set up email notificationsManaging your network Administration To check for new firmware and update your router Upgrade the Router FirmwareRouter Status View Router StatusInternet Port N150 4-Port Wireless Router JNR1010 Wireless AP  To view web access logs View Logs of Web Access or Attempted Web Access To restore configuration settings that you backed up Manage the Configuration FileBack Up Settings Restore Configuration SettingsErase Set PasswordAdvanced Settings  To configure advanced wireless settings Advanced Wireless SettingsRestrict Wireless Access by MAC Address Select the Turn Access Control On check box Wireless Repeating Function WDSRepeater access point Base station access point Wireless Repeating Function  To set up the base station Set Up the Base Station To configure the router as a repeater unit Set Up a Repeater UnitPort Forwarding and Triggering Destination port number Remote Computer Access BasicsPort Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local ServersAdd a Custom Service  To edit or delete a port forwarding entry Set Up Port TriggeringClick Edit Service or Delete Service Edit or Delete a Port Forwarding EntryUniversal Plug and Play on Dynamic DNS Select the Use a Dynamic DNS Service check box  To set up Dynamic DNSStatic Routes  To set up a static routeRemote Management Universal Plug and Play  To enable Universal Plug and Play Traffic Meter Troubleshooting Sequence to Restart Your Network Wireless SettingsNetwork Settings Quick TipsPower LED Is Off or Blinking Troubleshooting with the LEDsInternet or Ethernet Port LEDs Are Off Cannot Log In to the Router Wireless LED Is OffYour Router Cannot Obtain an IP Address from the ISP Cannot Access the InternetSelect Administration Router Status Click Connection Status Troubleshooting PPPoE To troubleshoot a PPPoE connection Changes Not Saved Troubleshooting Internet BrowsingRestore the Factory Settings and Password Wireless ConnectivityWireless Signal Strength Test the LAN Path to Your Router Troubleshoot Your Network Using the Ping Utility To ping the router from a Windows computer  To test the path from a Windows computer Test the Path from Your Computer to a Remote DeviceSupplemental Information Factory SettingsWPA2-PSK AES Technical SpecificationsSupplemental Information Notification of Compliance Netgear Wireless Routers, Gateways, APsNotification of Compliance Interference Reduction Table 100 Index101 102 103