NETGEAR JNR1010 manual Set Up Port Triggering, Edit or Delete a Port Forwarding Entry

Page 75

N150 4-Port Wireless Router JNR1010

Edit or Delete a Port Forwarding Entry

To edit or delete a port forwarding entry:

1.In the table, select the radio button next to the service name.

2.Click Edit Service or Delete Service.

Application Example: Making a Local Web Server Public

If you host a web server on your local network, you can use port forwarding to allow web requests from anyone on the Internet to reach your web server.

To make a local web server public:

1.Assign your web server either a fixed IP address or a dynamic IP address using DHCP address reservation.

In this example, your router always gives your web server an IP address of 192.168.1.33.

2.In the Port Forwarding screen, configure the router to forward the HTTP service to the local address of your web server at 192.168.1.33.

HTTP (port 80) is the standard protocol for web servers.

3.(Optional) Register a host name with a Dynamic DNS service, and configure your router to use the name as described in Dynamic DNS on page 77.

To access your web server from the Internet, a remote user must know the IP address that your ISP assigned. However, if you use a Dynamic DNS service, the remote user can reach your server by a user-friendly Internet name, such as mynetgear.dyndns.org.

Set Up Port Triggering

Port triggering is a dynamic extension of port forwarding that is useful in these cases:

More than one local computer needs port forwarding for the same application (but not simultaneously).

An application needs to open incoming ports that are different from the outgoing port.

When port triggering is enabled, the router monitors outbound traffic looking for a specified outbound “trigger” port. When the router detects outbound traffic on that port, it remembers the IP address of the local computer that sent the data. The router then temporarily opens the specified incoming port or ports and forwards incoming traffic on the triggered ports to the triggering computer.

Advanced Settings

75

Image 75
Contents N150 4-Port Wireless Router JNR1010 Technical Support TrademarksStatement of Conditions Contents Security Appendix B Notification of Compliance Index Getting to know your router Hardware SetupPosition Your Router Unpack Your RouterFront Panel Hardware FeaturesLED Side PanelLabel Back PanelGetting Started with Netgear genie Connecting to the routerGather ISP Information Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for DhcpTypes of Logins Netgear genie Setup To use Netgear genie to set up your router  To troubleshoot Internet access problems Use Netgear genie After InstallationRouter Dashboard Basic Home Screen Upgrade Router FirmwareJoin Your Wireless Network  To use WPS to join the wireless networkWPS Method Netgear genie App and Mobile genie App Manual Method To connect manually N150 4-Port Wireless Router JNR1010 Your Internet connection and network Genie Basic SettingsInternet Setup Does Your ISP Require a Login? Answer either yes or no Internet Setup Screen FieldsAttached Devices Parental Controls  To set up Live Parental ControlsN150 4-Port Wireless Router JNR1010 Click the Take me to the status screen button Basic Wireless Settings To view or change basic wireless settings Wireless Settings Screen Fields To change WPA Security Option and Passphrase ModeGuest Networks  To set up a guest networkFastLane Guest Network Wireless Security Options To set up the FastLane feature Genie Advanced Home Specifying custom settingsSetup Wizard  To use the setup wizard againSelect Setup Wizard  To use the WPS Wizard Select Advanced WPS Wizard WPS WizardWAN Setup Setup MenuDefault DMZ Server Change the MTU Size  To set up a default DMZ serverLAN Setup  To change the MTU size Select Advanced Setup WAN SetupLAN IP address LAN Setup Screen Settings  To change the LAN settingsLAN TCP/IP Setup Use the Router as a Dhcp Server  To reserve an IP address Address ReservationEnable WMM QoS for Wireless Multimedia Applications Quality of Service QoS Setup To create a QoS policy for applications and online games Set Up QoS for Applications and Online GamingClick the Add Priority Rule button Set up QoS for a Router LAN PortClick Add Priority Rule Set up QoS for a MAC Address To edit or delete a QoS policy Edit or Delete an Existing QoS PolicySecurity Keeping unwanted content out of your networkKeyword Blocking of Http Traffic  To delete a keyword or domain To specify a trusted computer  To block services Block Services Port FilteringUser Defined  To schedule blocking Schedule BlockingSecurity Event Email Notifications  To set up email notificationsManaging your network Administration To check for new firmware and update your router Upgrade the Router FirmwareRouter Status View Router StatusInternet Port N150 4-Port Wireless Router JNR1010 Wireless AP  To view web access logs View Logs of Web Access or Attempted Web Access To restore configuration settings that you backed up Manage the Configuration FileBack Up Settings Restore Configuration SettingsErase Set PasswordAdvanced Settings  To configure advanced wireless settings Advanced Wireless SettingsRestrict Wireless Access by MAC Address Select the Turn Access Control On check box Wireless Repeating Function WDSRepeater access point Base station access point Wireless Repeating Function  To set up the base station Set Up the Base StationSet Up a Repeater Unit  To configure the router as a repeater unitPort Forwarding and Triggering Destination port number Remote Computer Access BasicsPort Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local ServersAdd a Custom Service  To edit or delete a port forwarding entry Set Up Port TriggeringClick Edit Service or Delete Service Edit or Delete a Port Forwarding EntryUniversal Plug and Play on Dynamic DNS Select the Use a Dynamic DNS Service check box  To set up Dynamic DNSStatic Routes  To set up a static routeRemote Management Universal Plug and Play  To enable Universal Plug and Play Traffic Meter Troubleshooting Sequence to Restart Your Network Wireless SettingsNetwork Settings Quick TipsTroubleshooting with the LEDs Power LED Is Off or BlinkingInternet or Ethernet Port LEDs Are Off Cannot Log In to the Router Wireless LED Is OffYour Router Cannot Obtain an IP Address from the ISP Cannot Access the InternetTroubleshooting PPPoE Select Administration Router Status Click Connection Status To troubleshoot a PPPoE connection Changes Not Saved Troubleshooting Internet BrowsingWireless Connectivity Restore the Factory Settings and PasswordWireless Signal Strength Troubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router To ping the router from a Windows computer  To test the path from a Windows computer Test the Path from Your Computer to a Remote DeviceSupplemental Information Factory SettingsWPA2-PSK AES Technical SpecificationsSupplemental Information Notification of Compliance Netgear Wireless Routers, Gateways, APsNotification of Compliance Interference Reduction Table 100 Index101 102 103