NETGEAR JNR1010 manual Restrict Wireless Access by MAC Address

Page 63

N150 4-Port Wireless Router JNR1010

•WPS Settings.You can add WPS devices to your network:

•Disable Router’s PIN. The router’s PIN lets you use the WPS PIN method to join the wireless network. Selecting this check box disables the PIN, which means the WPS PIN method cannot be used.

•Keep Existing Wireless Settings. By default this check box is selected so that when WPS is used to join the wireless network, the router wireless settings do not change.

•Wireless Card Access List. Click the Set Up Access List button display the Wireless Card Access List screen. You can restrict access to your network to specific devices based on their MAC address.

3.Click the Apply button.

Restrict Wireless Access by MAC Address

You can create a list of computers and wireless devices that are allowed to join the wireless network. This list is based on the unique MAC address of each computer and device.

Each network device has a MAC address, which is a unique 12-character physical address, containing the hexadecimal characters 0¡V9, a¡Vf, or A¡VF only, and separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the wireless card or network interface device. If you do not have access to the label, you can display the MAC address using the network configuration utilities of the computer. You might also find the MAC addresses in the Attached Devices screen.

To restrict access based on MAC addresses:

1.Select Advanced > Advanced Setup > Wireless Settings and click Setup Access List.

The Wireless Card Access List screen displays.

2.Click Add to add a wireless device to the wireless access control list.

The Wireless Card Access Setup screen opens and displays a list of currently active wireless cards and their Ethernet MAC addresses.

Advanced Settings

63

Image 63

Contents N150 4-Port Wireless Router JNR1010 Technical Support TrademarksStatement of Conditions Contents Security Appendix B Notification of Compliance Index Getting to know your router Hardware SetupPosition Your Router Unpack Your RouterFront Panel Hardware FeaturesLED Side PanelLabel Back PanelGetting Started with Netgear genie Connecting to the routerGather ISP Information Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for DhcpTypes of Logins Netgear genie Setup To use Netgear genie to set up your router  To troubleshoot Internet access problems Use Netgear genie After InstallationRouter Dashboard Basic Home Screen Upgrade Router FirmwareJoin Your Wireless Network  To use WPS to join the wireless networkWPS Method Netgear genie App and Mobile genie App Manual Method To connect manually N150 4-Port Wireless Router JNR1010 Your Internet connection and network Genie Basic SettingsInternet Setup Does Your ISP Require a Login? Answer either yes or no Internet Setup Screen FieldsAttached Devices Parental Controls  To set up Live Parental ControlsN150 4-Port Wireless Router JNR1010 Click the Take me to the status screen button Basic Wireless Settings To view or change basic wireless settings Wireless Settings Screen Fields To change WPA Security Option and Passphrase ModeGuest Networks  To set up a guest networkFastLane Guest Network Wireless Security Options To set up the FastLane feature Genie Advanced Home Specifying custom settingsSetup Wizard  To use the setup wizard againSelect Setup Wizard  To use the WPS Wizard Select Advanced WPS Wizard WPS WizardWAN Setup Setup MenuDefault DMZ Server Change the MTU Size  To set up a default DMZ serverLAN Setup  To change the MTU size Select Advanced Setup WAN SetupLAN IP address LAN Setup Screen Settings  To change the LAN settingsLAN TCP/IP Setup Use the Router as a Dhcp Server  To reserve an IP address Address ReservationEnable WMM QoS for Wireless Multimedia Applications Quality of Service QoS Setup To create a QoS policy for applications and online games Set Up QoS for Applications and Online GamingClick the Add Priority Rule button Set up QoS for a Router LAN PortClick Add Priority Rule Set up QoS for a MAC Address To edit or delete a QoS policy Edit or Delete an Existing QoS PolicySecurity Keeping unwanted content out of your networkKeyword Blocking of Http Traffic  To delete a keyword or domain To specify a trusted computer  To block services Block Services Port FilteringUser Defined  To schedule blocking Schedule BlockingSecurity Event Email Notifications  To set up email notificationsManaging your network Administration To check for new firmware and update your router Upgrade the Router FirmwareRouter Status View Router StatusInternet Port N150 4-Port Wireless Router JNR1010 Wireless AP  To view web access logs View Logs of Web Access or Attempted Web Access To restore configuration settings that you backed up Manage the Configuration FileBack Up Settings Restore Configuration SettingsErase Set PasswordAdvanced Settings  To configure advanced wireless settings Advanced Wireless SettingsRestrict Wireless Access by MAC Address Select the Turn Access Control On check box Wireless Repeating Function WDSRepeater access point Base station access point Wireless Repeating Function  To set up the base station Set Up the Base StationSet Up a Repeater Unit  To configure the router as a repeater unitPort Forwarding and Triggering Destination port number Remote Computer Access BasicsPort Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local ServersAdd a Custom Service  To edit or delete a port forwarding entry Set Up Port TriggeringClick Edit Service or Delete Service Edit or Delete a Port Forwarding EntryUniversal Plug and Play on Dynamic DNS Select the Use a Dynamic DNS Service check box  To set up Dynamic DNSStatic Routes  To set up a static routeRemote Management Universal Plug and Play  To enable Universal Plug and Play Traffic Meter Troubleshooting Sequence to Restart Your Network Wireless SettingsNetwork Settings Quick TipsTroubleshooting with the LEDs Power LED Is Off or BlinkingInternet or Ethernet Port LEDs Are Off Cannot Log In to the Router Wireless LED Is OffYour Router Cannot Obtain an IP Address from the ISP Cannot Access the InternetTroubleshooting PPPoE Select Administration Router Status Click Connection Status To troubleshoot a PPPoE connection Changes Not Saved Troubleshooting Internet BrowsingWireless Connectivity Restore the Factory Settings and PasswordWireless Signal Strength Troubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router To ping the router from a Windows computer  To test the path from a Windows computer Test the Path from Your Computer to a Remote DeviceSupplemental Information Factory SettingsWPA2-PSK AES Technical SpecificationsSupplemental Information Notification of Compliance Netgear Wireless Routers, Gateways, APsNotification of Compliance Interference Reduction Table 100 Index101 102 103