Allied Telesis NetScreen Routers manual Check the settings again, Finish the wizard

Page 10

9.Check the settings again

Check the summary. It now includes the Peer ID settings. If necessary, correct any settings you want to change.

When all the settings are correct, click the Apply button.

	10. Finish the wizard
Security
Security	If you are logged in as the security
officer	officer, the GUI displays a completion
	message. Click the Finish button to
	finish the Wizard and save the VPN
	settings.

Page 10 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 10

Contents AlliedWareTM OS What information will you find in this document? Related How To NotesWhich products and software version does it apply to? Network RouterHow to configure the Allied Telesis router StartVPN tunnel 1. Open the Configuration Wizards Start the Site-to-Site VPN wizard Name the VPN connectionEnter the remote site’s WAN IP address Enter the remote site’s LAN IP addressCheck the settings Enter the shared secret keySpecify Peer IDs Check the settings again Finish the wizardManager Connect a PC to the router How to configure the SonicWALL routerAccess the Router Set the PC’s IP addressBrowse to the router’s management GUI Log on14 AlliedWare OS How To Note VPNs with SonicWALL routers Change the administrator password Customise the router and set up the networkSet the time zone Enter the WAN settings Choose the type of WAN addressSet up the Dhcp server Enter the LAN addressClick the Close button Log in again Define the LAN subnet of the peer Open the Address Objects summaryOpen the Custom Address Objects summary Define the address object22 AlliedWare OS How To Note VPNs with SonicWALL routers Return to the Configuration Wizards Create the VPNCreate the Site-to-Site policy Select the networks for each end of the LANSpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Set the VPN IKE IDs and use Main Mode Specify the Local and Peer IKE IDsSpecify IKE Main Mode If necessary, restart the routerCheck the tunnel status How to test the tunnelPing the SonicWALL LAN How to use the CLI instead of the GUI Wizard, for Remote Peer IP