Allied Telesis NetScreen Routers manual Create the VPN, Return to the Configuration Wizards

Page 23

Create the VPN

The following steps use the VPN wizard to create the SonicWALL end of the VPN.

1.Return to the Configuration Wizards page

Click on the Wizards button in the left-hand menu to open the Configuration Wizard page, then select the VPN wizard.

Click the Next button.

2.Start the Site-to-Site VPN wizard

Select the Site-to-Site option.

Click the Next button.

Page 23 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 23

Contents AlliedWareTM OS Which products and software version does it apply to? Related How To NotesWhat information will you find in this document? Router NetworkStart How to configure the Allied Telesis routerVPN tunnel 1. Open the Configuration Wizards Name the VPN connection Start the Site-to-Site VPN wizardEnter the remote site’s LAN IP address Enter the remote site’s WAN IP addressEnter the shared secret key Check the settingsSpecify Peer IDs Finish the wizard Check the settings againManager Set the PC’s IP address How to configure the SonicWALL routerAccess the Router Connect a PC to the routerLog on Browse to the router’s management GUI14 AlliedWare OS How To Note VPNs with SonicWALL routers Set the time zone Customise the router and set up the networkChange the administrator password Choose the type of WAN address Enter the WAN settingsEnter the LAN address Set up the Dhcp serverClick the Close button Log in again Open the Address Objects summary Define the LAN subnet of the peerDefine the address object Open the Custom Address Objects summary22 AlliedWare OS How To Note VPNs with SonicWALL routers Create the VPN Return to the Configuration WizardsSelect the networks for each end of the LAN Create the Site-to-Site policySpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Specify the Local and Peer IKE IDs Set the VPN IKE IDs and use Main ModeIf necessary, restart the router Specify IKE Main ModePing the SonicWALL LAN How to test the tunnelCheck the tunnel status How to use the CLI instead of the GUI Wizard, for Remote Peer IP