Allied Telesis NetScreen Routers manual Enter the remote site’s WAN IP address

Page 7

4.Enter the remote site’s WAN IP address

Enter the public IP address of the other end of the tunnel. In this example, this is 200.200.200.1, which is the IP address of the SonicWALL WAN interface.

Note that you can use the Tab key to move between fields when entering the address, but should not use the . key (the period).

Click the Next button.

5.Enter the remote site’s LAN IP address

Enter the SonicWALL router’s LAN subnet address and mask. In this example, this is 192.168.2.0 and a mask of 255.255.255.0.

Click the Next button.

Page 7 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AlliedWareTM OS What information will you find in this document? Related How To NotesWhich products and software version does it apply to? Router NetworkStart How to configure the Allied Telesis routerVPN tunnel 1. Open the Configuration Wizards Name the VPN connection Start the Site-to-Site VPN wizardEnter the remote site’s LAN IP address Enter the remote site’s WAN IP addressEnter the shared secret key Check the settingsSpecify Peer IDs Finish the wizard Check the settings againManager Set the PC’s IP address How to configure the SonicWALL routerAccess the Router Connect a PC to the routerLog on Browse to the router’s management GUI14 AlliedWare OS How To Note VPNs with SonicWALL routers Change the administrator password Customise the router and set up the networkSet the time zone Choose the type of WAN address Enter the WAN settingsEnter the LAN address Set up the Dhcp serverClick the Close button Log in again Open the Address Objects summary Define the LAN subnet of the peerDefine the address object Open the Custom Address Objects summary22 AlliedWare OS How To Note VPNs with SonicWALL routers Create the VPN Return to the Configuration WizardsSelect the networks for each end of the LAN Create the Site-to-Site policySpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Specify the Local and Peer IKE IDs Set the VPN IKE IDs and use Main ModeIf necessary, restart the router Specify IKE Main ModeCheck the tunnel status How to test the tunnelPing the SonicWALL LAN How to use the CLI instead of the GUI Wizard, for Remote Peer IP
Top Page Image Contents