Allied Telesis NetScreen Routers manual Start the Site-to-Site VPN wizard, Name the VPN connection

Page 6

2.Start the Site-to-Site VPN wizard

Click on the Site-to-Site VPN button. The wizard starts by displaying a welcome message.

Click the Next button.

3.Name the VPN connection

Enter an appropriate VPN connection name.

Click the Next button. If you have multiple possible WAN interfaces configured on the router, the wizard next lets you select the appropriate interface. In this example there is only one WAN interface, so the wizard selects it automatically and moves directly to the remote site settings.

Page 6 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 6

Contents AlliedWareTM OS Related How To Notes What information will you find in this document?Which products and software version does it apply to? Network RouterHow to configure the Allied Telesis router StartVPN tunnel 1. Open the Configuration Wizards Start the Site-to-Site VPN wizard Name the VPN connectionEnter the remote site’s WAN IP address Enter the remote site’s LAN IP addressCheck the settings Enter the shared secret keySpecify Peer IDs Check the settings again Finish the wizardManager Connect a PC to the router How to configure the SonicWALL routerAccess the Router Set the PC’s IP addressBrowse to the router’s management GUI Log on14 AlliedWare OS How To Note VPNs with SonicWALL routers Customise the router and set up the network Change the administrator passwordSet the time zone Enter the WAN settings Choose the type of WAN addressSet up the Dhcp server Enter the LAN addressClick the Close button Log in again Define the LAN subnet of the peer Open the Address Objects summaryOpen the Custom Address Objects summary Define the address object22 AlliedWare OS How To Note VPNs with SonicWALL routers Return to the Configuration Wizards Create the VPNCreate the Site-to-Site policy Select the networks for each end of the LANSpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Set the VPN IKE IDs and use Main Mode Specify the Local and Peer IKE IDsSpecify IKE Main Mode If necessary, restart the routerHow to test the tunnel Check the tunnel statusPing the SonicWALL LAN How to use the CLI instead of the GUI Wizard, for Remote Peer IP