Allied Telesis NetScreen Routers Customise the router and set up the network, Set the time zone

Page 15

Customise the router and set up the network

The following steps use the Setup wizard to begin configuring your router.

1.Change the administrator password

The first action in the Setup wizard is to enter a suitable password for access to the GUI.

Click the Next button.

2.Set the time zone

Select your time zone, and set the router to automatically adjust for summer time.

Click the Next button.

Page 15 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 15

Contents AlliedWareTM OS Related How To Notes What information will you find in this document?Which products and software version does it apply to? Router NetworkStart How to configure the Allied Telesis routerVPN tunnel 1. Open the Configuration Wizards Name the VPN connection Start the Site-to-Site VPN wizardEnter the remote site’s LAN IP address Enter the remote site’s WAN IP addressEnter the shared secret key Check the settingsSpecify Peer IDs Finish the wizard Check the settings againManager Set the PC’s IP address How to configure the SonicWALL routerAccess the Router Connect a PC to the routerLog on Browse to the router’s management GUI14 AlliedWare OS How To Note VPNs with SonicWALL routers Customise the router and set up the network Change the administrator passwordSet the time zone Choose the type of WAN address Enter the WAN settingsEnter the LAN address Set up the Dhcp serverClick the Close button Log in again Open the Address Objects summary Define the LAN subnet of the peerDefine the address object Open the Custom Address Objects summary22 AlliedWare OS How To Note VPNs with SonicWALL routers Create the VPN Return to the Configuration WizardsSelect the networks for each end of the LAN Create the Site-to-Site policySpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Specify the Local and Peer IKE IDs Set the VPN IKE IDs and use Main ModeIf necessary, restart the router Specify IKE Main ModeHow to test the tunnel Check the tunnel statusPing the SonicWALL LAN How to use the CLI instead of the GUI Wizard, for Remote Peer IP