Allied Telesis NetScreen Routers manual Create the Site-to-Site policy

Page 24

3.Create the Site-to-Site policy

Name the policy. Enter the pre-shared key, which must be the same as the Allied Telesis router’s secret key. Enter the remote peer address, which is the SonicWALL-facing side of the NAT device in this example (see "The network" on page 3).

Click the Next button.

4.Select the networks for each end of the LAN

For the local (SonicWALL) end, select Firewalled Subnets. For the destination (Allied Telesis) end, select the address object that you created in "Define the LAN subnet of the peer" on page 20.

Click the Next button.

Page 24 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Page 23 Page 25
Image 24
Page 23 Page 25
Contents AlliedWareTM OS Related How To Notes What information will you find in this document?Which products and software version does it apply to? Network RouterHow to configure the Allied Telesis router StartVPN tunnel 1. Open the Configuration Wizards Start the Site-to-Site VPN wizard Name the VPN connectionEnter the remote site’s WAN IP address Enter the remote site’s LAN IP addressCheck the settings Enter the shared secret keySpecify Peer IDs Check the settings again Finish the wizardManager How to configure the SonicWALL router Access the RouterConnect a PC to the router Set the PC’s IP addressBrowse to the router’s management GUI Log on14 AlliedWare OS How To Note VPNs with SonicWALL routers Customise the router and set up the network Change the administrator passwordSet the time zone Enter the WAN settings Choose the type of WAN addressSet up the Dhcp server Enter the LAN addressClick the Close button Log in again Define the LAN subnet of the peer Open the Address Objects summary Open the Custom Address Objects summary Define the address object22 AlliedWare OS How To Note VPNs with SonicWALL routers Return to the Configuration Wizards Create the VPNCreate the Site-to-Site policy Select the networks for each end of the LANSpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Set the VPN IKE IDs and use Main Mode Specify the Local and Peer IKE IDsSpecify IKE Main Mode If necessary, restart the routerHow to test the tunnel Check the tunnel statusPing the SonicWALL LAN How to use the CLI instead of the GUI Wizard, for Remote Peer IP
Top Page Image Contents