Allied Telesis NetScreen Routers manual Choose the type of WAN address, Enter the WAN settings

Page 16

3.Choose the type of WAN address

In this example, the SonicWALL router has a permanent fixed IP address, so select the Static IP option.

Then click the Next button.

4.Enter the WAN settings

Enter the WAN interface’s IP address and mask. For Gateway, enter the ISP’s address (see "The network" on page 3). For DNS Server Address, enter the address of the DNS server that your router will access.

Then click the Next button.

Page 16 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 16

Contents AlliedWareTM OS What information will you find in this document? Related How To NotesWhich products and software version does it apply to? Network RouterHow to configure the Allied Telesis router StartVPN tunnel 1. Open the Configuration Wizards Start the Site-to-Site VPN wizard Name the VPN connectionEnter the remote site’s WAN IP address Enter the remote site’s LAN IP addressCheck the settings Enter the shared secret keySpecify Peer IDs Check the settings again Finish the wizardManager How to configure the SonicWALL router Access the RouterConnect a PC to the router Set the PC’s IP addressBrowse to the router’s management GUI Log on14 AlliedWare OS How To Note VPNs with SonicWALL routers Change the administrator password Customise the router and set up the networkSet the time zone Enter the WAN settings Choose the type of WAN addressSet up the Dhcp server Enter the LAN addressClick the Close button Log in again Define the LAN subnet of the peer Open the Address Objects summaryOpen the Custom Address Objects summary Define the address object22 AlliedWare OS How To Note VPNs with SonicWALL routers Return to the Configuration Wizards Create the VPNCreate the Site-to-Site policy Select the networks for each end of the LANSpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Set the VPN IKE IDs and use Main Mode Specify the Local and Peer IKE IDsSpecify IKE Main Mode If necessary, restart the routerCheck the tunnel status How to test the tunnelPing the SonicWALL LAN How to use the CLI instead of the GUI Wizard, for Remote Peer IP