Allied Telesis NetScreen Routers manual AlliedWare OS How To Note VPNs with SonicWALL routers

Page 14

The first time you configure your router, the GUI opens at the Configuration Wizard page.

After initial configuration, when you browse to the SonicWALL it may open at the System > Status page instead of the Configuration Wizard page.

Click on the Wizards button in the left-hand menu to open the Configuration Wizard page.

Page 14 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 14

Contents AlliedWareTM OS Which products and software version does it apply to? Related How To NotesWhat information will you find in this document? Network RouterHow to configure the Allied Telesis router StartVPN tunnel 1. Open the Configuration Wizards Start the Site-to-Site VPN wizard Name the VPN connectionEnter the remote site’s WAN IP address Enter the remote site’s LAN IP addressCheck the settings Enter the shared secret keySpecify Peer IDs Check the settings again Finish the wizard Manager Connect a PC to the router How to configure the SonicWALL routerAccess the Router Set the PC’s IP addressBrowse to the router’s management GUI Log on14 AlliedWare OS How To Note VPNs with SonicWALL routers Set the time zone Customise the router and set up the networkChange the administrator password Enter the WAN settings Choose the type of WAN addressSet up the Dhcp server Enter the LAN addressClick the Close button Log in again Define the LAN subnet of the peer Open the Address Objects summaryOpen the Custom Address Objects summary Define the address object22 AlliedWare OS How To Note VPNs with SonicWALL routers Return to the Configuration Wizards Create the VPNCreate the Site-to-Site policy Select the networks for each end of the LANSpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Set the VPN IKE IDs and use Main Mode Specify the Local and Peer IKE IDsSpecify IKE Main Mode If necessary, restart the routerPing the SonicWALL LAN How to test the tunnelCheck the tunnel status How to use the CLI instead of the GUI Wizard, for Remote Peer IP